xTool Selected Air Compressor & Air Dryer - Air Compressor + Air Dryer
Description
Overview
xTool Air Compressor and Air Dryer for MetalFab
The Most Cost-Efficient Gas Solution for Burr-free Metal Cutting
**The air compressor and the air dryer must be used together.
Save $20,000+/year
Than Gas Cylinders
A single 40L nitrogen cylinder lasts just 30 minutes, costing over $20K annually for continuous metalcutting. So why not switch to xTool SaveGas™ solution and stop wasting money on gas tanks? No more nitrogen, argon or oxygen refills. Invest once, cut forever.
xTool SaveGas™ Nozzle
50% Gas Savings, Cut Costs Now!
xTool self-developed SaveGas™ cutting nozzle features a unique telescopic design that minimizes gas leakage and concentrates airflow for precise cuts. You only need 87 PSI of air pressure to achieve cutting results comparable to 174 PSI of nitrogen-cutting your gas costs to the lowest!
Cut 4mm Metal Like Butter
Achieve perfect cuts in thick metals with 87 PSI air pressure—whether it’s 4 mm stainless steel, 4 mm aluminum, or 3 mm brass—using only xTool SaveGas™ nozzle, Air Compressor and Air Dryer!
HyperPure™ Filtration System
xTool Ary Dryer applies a triple-stage industrial-grade filter that removes 99% of moisture, impurities, and oil to guarantee ultra-clean, dry air for peak cutting performance!
Space-saving Design Fits Your Studio
Nobody offers such a compact yet powerful air system for metal cutting! At just 0.066 m³ in size—providing equal performance but smaller than industrial units and more convenient than gas cylinders. You can lift it easily with one hand!
45s Air Generation, Non-stop Cut
Powered by a 2,200W motor and a 20L gas tank, xTool Air Compressor delivers stable, continuous air pressure over 87 PSI(0.6MPa), achieving non-stop cuts. It recovers from 0 PSI to 145 PSI in just 45 seconds, enhancing your metalwork efficiency.
Quality Guaranteed, Built to Last
xTool Air Compressor and Air Dryer can operate reliably for 2,400 hours even in environments ranging from -10℃ to 40℃, leading to a longlasting use.
In the Box
Specifications
Key Information xTool Selected Air Compressor Max. Air Pressure
145 PSI (1.0 MPa)
Working Air Pressure
87 PSI to 114 PSI (0.6 MPa ~ 0.79 MPa)
Max. Air Flow
12.4 SCFM (350 L/min)
Tank Capacity
5.3 Gallon (20L)
Rated Power
3.0 HP (2200 W)
Recovery Time
45s from 0 to 145 PSI (0~1.0 MPa)
Product Dimensions
18.11'' × 20.87'' × 10.63'' (460 mm × 530 mm × 270 mm)
Product Weight
35.27 lbs (16 kg)
Operating Voltage
220 V
Pipe Diameter
0.39'' (10 mm)
Working Temperature
14 °F to 104 °F (-10 ℃ ~ 40 ℃)
Key Information xTool Selected Air Dryer Filtration Efficiency
99% moisture drying, 99.999% oil/rust removal
Max. Allowable Airflow
14.1 CFM (400L/min)
Max. Allowable Air Pressure
181 PSI (1.25 MPa)
Dew Point
36 ℉~50 ℉ (2 ℃~10 ℃)
Air Inlet Temperature
≤113 ℉ (45 ℃)
Rated Power
0.51 HP (380 W)
Product Dimensions
15.83'' × 13.98'' × 8.94'' (402 mm × 355 mm × 227 mm)
Product Weight
23.81 lbs (10.8 kg)
Operating Voltage / Current
US: 110V, 4.8 A
Pipe Diameter
0.39'' (10 mm)
Working Temperature
14 °F to 104 °F (-10 ℃ ~ 40 ℃)
FAQs
Can I use the air compressor separately?
No, the air compressor and air dryer must be used together. Otherwise, compressed air containing moisture, oil, and dust will enter the welding gun and air lines, which will not only degrade cutting performance but also damage the equipment.
So now we don't offer an option of purchasing xTool air compressor separately.
Can I use the xTool air dryer with my own air compressor?
Yes, but the air compressor should meet strict requirements:
To achieve best cutting eeffcts, xTool air dryer should be used with an air compressor that has a rated pressure over 145 PSI (1.0MPa), air flow over 7CFM@87PSI (200L/[email protected]) when using the xTool SaveGas nozzle.
Also, the air flow that goes into the air dryer should be lower than 14.1 CFM (400L/min), the air pressure should be lower than 181 PSI (1.25MPa), the air temperature should be lower than 122℉ ( 50℃). Otherwise, it will cause damage to the air dryer and bad cutting effects.
What metals can be cut using xTool's air compressor and refrigerated dryer?
The maximum air pressure output of xTool air compressor is 1.0MPa, stably providing over 0.6MPa during cutting.
When paired with xTool SaveGas™ Nozzle, it can cut up to 4mm stainless steel, 4mm aluminum, 3mm brass, 1mm carbon steel (ordinary nozzle), and 1mm galvanized steel (ordinary nozzle) with no burrs.
For thicker stainless steel, it is recommended to use nitrogen, argon, or an air compressor with a pressure above 1.2MPa.
For thicker carbon steel, oxygen cutting is advised.
How do xTool air compressor and air dryer differ from other brands?
xTool air compressor is compact yet delivers powerful performance, equipped with a 5.2HP high-power motor that provides up to 1.0MPa pressure and 14.1 CFM airflow, specifically designed for metal
- SKU
- P1030705-P1030702 (3D Universe)
Vendor Pricing & Availability
3D Universe
Updated: 5 hours ago
$1,699.00
Free Shipping
Store links may be affiliate links: we may earn a commission at no extra cost to you.
Advertisement
Price history
Lowest price each day
$1,699
Collecting price history
We have one day of prices so far. The trend line appears after at least two days.
View as table
| Date | 3D Universe |
|---|---|
| Nov 18, 2026 | $1,699 |
xTool Selected Air Compressor & Air Dryer - Air Compressor + Air Dryer price history: the price has held at $1,699.00 since Nov 18, 2026. The lowest price we've tracked is $1,699.00 (Nov 18, 2026), and we've followed it since Nov 18, 2026.
Advertisement