xTool SafetyPro™ AP2 Air Purifier with SuperCyclone System

Description

xTool SafetyPro™ AP2 Air Purifier with SuperCyclone System

Truly Safe & Clean, Feel the Difference

6 Filters Weigh Up to 20lbs and Clean Layer by Layer

6-stage filtration weighs 20lbs (Without the cyclone layer, the remaining 5 filters weigh 17lbs), ensuring maximum removal of fumes and odors for healthy breathing during laser processing.

Dust-Removal

Odor-Removal

SuperCyclone Separation Technology
The Best Solution for Dust Collection

99% Capture Large Particles

36 small cyclone groups operate in parallel, generating super centrifugal force, efficiently separating dust and dirt, and preventing clogging of filters.

Expand Pre-filter's Lifespan by 10 Times

With a cyclone in place, all large particles can be separated which extends the lifespan of your filters up to 10 times longer compared to those without a cyclone.
*The results estimate the filtration of residue from the regular laser cutting of 3mm acrylic and basswood.

Washable and Reusable

The filters are very easy to clean and reuse. Simply wash them to keep the cyclone working like new, saving you the cost of replacing pre-filters.

Breathe Fresh Air Even in Laser Cutting

We arranged carbon particles 400 times smaller in a high-density structure for enhanced adsorption.

Advance Odor Filtration
Ultra-Dense Carbon Mesh, Stronger Adsorption

VOC Removal Tested with PID Sensor Equipment

Intelligent Control
Beyond Convenience, Smarter Than You Think

Auto-On/Off, Sync with xTool Lasers

The purifier automatically starts and shuts down with the xTool lasers. You can also customize the shutdown time to ensure all fumes are expelled.

Tailored Setting for Every Material

The purifier automatically matches the optimal filtration mode based on the material selected by the user.

Tailored Setting for Every Material

The system monitors filter usage in real-time, preventing premature replacements or missed change intervals, and optimizing cartridge efficiency.

Well-Designed for A Better Experience

Upgraded Motor, Super Suction

The high-torque centrifugal motor delivers greater fan output power, enabling the rapid exhaust of polluted gases.

Easy to Change Filter Cartridge

Pull-out magnetic door design, no need to dismantle the machine. Simply pull to open, making it easy to remove, wash, and replace the filter.

Low-dB Operation, Non-Disruptive

AP2 operates at just 55 dB for low noise, ensuring a more peaceful operation perfect for home use.

The Safer Way to Create

xTool SafetyPro™ Series

Specifications

New Column xTool SafetyPro™ AP2 xTool Smoke Purifie

Adapted Machine

P2S, P2, S1, M1 Ultra, F1 Ultra, D1, M1, F1

P2S, P2, S1, M1 Ultra, F1 Ultra, D1, M1

Product Size

Text290*491*542mm

425*250*410mm

Product Weight

20.7kg / 45.6 lbs

15.7kg / 34.6 lbs

Control Mode

Touch button, four adjustable gears

Knob control, stepless gear adjustment

Pre-filtration System

Cyclone Separation

Cyclone Separation

Rated Power

220W

150W

Filter Layers

SuperCyclone Filter
Pre-Filter
Medium Efficiency Filter
Activated Carbon Layer
Ultra-Dense Carbon Mesh
High Efficiency Filter

Pre-Filter
Activated Carbon Layer
High Efficiency Filter

Noise

55dB

55dB

FAQ

Is the SafetyPro AP2 compatible with all xTool laser machines?
Yes, Manual mode is compatible with all our lasers: P2S, P2, S1, M1 Ultra, F1 Ultra, D1, D1 Pro, M1, and F1. And auto-mode is only compatible with P2S, S1, M1 Ultra, and F1 Ultra.
Why can only certain models sync?
Syncing the AP2 with the engraving machine requires a Bluetooth dongle for information transmission. At present, only the S1, F1 Ultra, M1 Ultra, and P2S meet this requirement.
Is it compatible with laser machines from other brands?
The diameter size that the product can adapt to is 3 inches,as long as the size of the smoke exhaust pipe of the laser machine meets the requirements.
Does the cyclone need to be dried after cleaning?
Yes, it needs to be dried. A damp cyclone can affect the lifespan of the 3rd and 4th filters (the activated carbon layer and the carbon mesh layer).

Can the air outlets be vented directly into the room?
Yes, exhaust air can be discharged directly into the room because our purified exhaust air meets the air quality requirements for direct indoor exhaust.
Do I need to turn off the laser fan when the purifier is in use?
The P2 and P2S models need to turn off the fan of the laser machine when used with the purifier. The P2S will automatically turn off the fan when linked with the purifier.
Other laser machines do not need to have the fan turned off when used with the purifier.
How often should the cyclone be cleaned?
It’s recommended to clean it every 6 months, but users can adjust this based on actual usage conditions.

SKU
xTool_SafetyProAP2 P5010390 (3D Universe)

Vendor Pricing & Availability

3D Universe

Updated: 5 hours ago

$999.00

Free Shipping

Buy Now →

Store links may be affiliate links: we may earn a commission at no extra cost to you.

Advertisement

Price history

Lowest price each day

$999

Collecting price history

We have one day of prices so far. The trend line appears after at least two days.

View as table
Date 3D Universe
Nov 18, 2026 $999

xTool SafetyPro™ AP2 Air Purifier with SuperCyclone System price history: the price has held at $999.00 since Nov 18, 2026. The lowest price we've tracked is $999.00 (Nov 18, 2026), and we've followed it since Nov 18, 2026.

Advertisement

Zeb · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.

Eck · 2d ago

Message hidden until you log in.

7 recent messages, hidden until you log in. Log in or sign up to read the chat and join in.

Send private messages to other members.

Log in