TPU-Aero Filament - Black HEX Code #000000

Description

QIDI TPU-Aero

TPU-Aero is a medium-hard, reactive foaming flexible material developed
specifically for FFF printing technology. By controlling the printing temperature, different foaming ratios can
be achieved, thereby achieving different weight and hardness effects. Combined with excellent elasticity, wear
resistance and lightweight properties, it can be used in sports equipment, industrial parts, aerospace
prototypes and creative design.

Lightweight and excellent interlayer adhesion

TPU-Aero is more than 50% lighter than traditional TPU
materials, has excellent interlayer adhesion, and the weight of the material can be controlled by
adjusting the printing temperature. It is particularly suitable for weight-sensitive application
scenarios such as sports equipment, aerospace, etc.

Adjustable weight and hardness

By adjusting the temperature, flow ratio or filling
density, the hardness can be precisely controlled from 85A to 65A to achieve interesting different
printing effects.

High resilience, high toughness

TPU-Aero has excellent deformation recovery ability, which
is suitable for parts that need to be deformed repeatedly. It has strong tear and impact resistance
and is not easy to break under extreme stress.

Matte Finish, Fabric Texture

Premium fabric-like texture meets engineering-grade
performance,Stimulate your creative imagination

Low water absorption

It can maintain stable performance in water or humid
environment and will not expand/deform due to water absorption

Compatibility

Recommended

Not Recommended

Multi-color printing system

/

QIDI BOX, AMS, and other multi-color printing systems that require feeding through PTFE tubes

Spport Filament

PLA Basic

/

Build Plate

QIDI Cool Plate pro, QIDI PEI Plate and Smooth Plate(Spray alcohol to help remove print parts), HF Plate, PC Plate

/

Nozzle

Brass/Copper plated Nozzle(0.4 / 0.6mm )

Hardened Steel Nozzle ( 0.4 / 0.6mm )

Bimetal Nozzle ( 0.4 / 0.6mm )

Brass/Copper plated Nozzle(0.8 mm)

Hardened Steel Nozzle (0.8 mm)

Bimetal Nozzle (0.8 mm)

Glue

Glue Stick

/

Recommended Printing Settings

Drying Settings (Blast Drying Oven)
70-80 °C,4-6 h

Printing and Keeping Container's Humidity
< 15% RH (Sealed, with Desiccant)

Nozzle Temperature
230-270 °C

Bed Temperature (with Glue)
30-45 °C

Printing Speed
30-50 mm/s

Physical Properties

Density
0.74 g/cm³

Water absorption
1.09 %

Vicat softening temperature
70.4°C

Melt index
8 g/10min(190°C,2.16kg)

Mechanical Properties

Tensile strength(X-Y)
4.23±0.04 MPa

Tensile breaking strength (X-Y)
6.81±0.11 MPa

elongation at break (X-Y)
576.27±8.48 %

Specimens printed under the following conditions:
print temperature 250°C,Flow ratio 0.68,Nozzle size 0.4mm,Bed temp 45°C, Print speed 60mm/s, Infill 100%, Infill
angle ±45°

Downloads

Filament TDS

Filament MSDS

Printing Tips

TPU materials are prone to moisture absorption
when exposed to air. It is recommended to put TPU-Aero filaments in a drying oven (humidity
controlled below 15%) immediately after opening the vacuum foil packaging. Unused filaments
should be resealed in the original foil packaging.

For TPU-Aero filaments that are exposed to air
for a long time, it is recommended to put the filaments in a 70-80°C oven for 4-6 hours before
printing to avoid problems such as bubbles, holes or drawing caused by moisture.

Due to the continuous expansion of the foaming
material in the hot end cavity, leakage is inevitable during the stroke movement. Even adjusting
the retraction distance and speed cannot improve this situation. It is recommended to disable
the retraction function in the slicing software, print only one model at a time, or use the
piece-by-piece printing function, and turn on the option to avoid crossing the outer wall to
reduce drawing and leakage caused by long-distance idling and jumping.

Some of PEI textured or PEI film build plates may
exhibit excessive adhesion to TPU materials, making printed parts difficult to remove. It is
recommended to use alcohol to remove the parts.

For more details please refer to: Filament Guide on WIKI.

Vacuum Aluminum Foil Packaging

According to the test, the water vapor transmission rate of ordinary
sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is
only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant.

Product Size

QIDI TECH TPU-Aero filament 1.75mmWorks perfectly with most FDM
3Dprinters on the market.

SKU
TPU-AeroHS (QIDI Tech)

Vendor Pricing & Availability

QIDI Tech

Updated: 5 hours ago

$45.99

Free Shipping

Buy Now →

Store links may be affiliate links: we may earn a commission at no extra cost to you.

Sort:
Sort:

Advertisement

Price history

Lowest price each day

$45.99

Collecting price history

We have one day of prices so far. The trend line appears after at least two days.

View as table
Date QIDI Tech
Nov 16, 2026 $45.99

Advertisement

Zeb · 7h ago

Message hidden until you log in.
B

bob · 7h ago

Message hidden until you log in.
B

bob · 7h ago

Message hidden until you log in.
B

bob · 7h ago

Message hidden until you log in.
B

bob · 7h ago

Message hidden until you log in.
B

bob · 7h ago

Message hidden until you log in.

Eck · 45m ago

Message hidden until you log in.

7 recent messages, hidden until you log in. Log in or sign up to read the chat and join in.

Send private messages to other members.

Log in