RAMBo v1.4 Kit with LCD Harnesses

Description

This all-in-one TAZ 6 3D printer motherboard is made by UltiMachine using an Arduino MEGA microcontroller board, and comes equipped with integrated stepper drivers, built in fuses, and more. The RAMBo 1.4 board is the direct replacement for the RAMBo used in the LulzBot TAZ 6 and includes the two wiring harnesses used to connect to the Graphical LCD Controller.

Works with: LulzBot TAZ Workhorse, LulzBot TAZ 6

Does not come with pre-installed firmware

Parts Included
One (1) RAMBo electronics board
Two (2) Graphical LCD controller harnesses
Specifications

Designed and Manufactured by UltiMachine

Logic

Arduino MEGA compatible Atmega2560 and Atmega32u2 processors are compatible with all RAMPS class firmwares

Crystals for both usb and mcu (timing accurate to 10ppm)

4 Thermistor jacks

All extra pins broken out on both processors (allows using the 32u2 for LUFA AVR programmer, etc.)

2 channel SDRAMPS compatible SPI breakout

Motor Drivers

5 A4982 1/8th microsteps motor drivers with 1,1/2,1/4,1/16 as options (2 connectors for Z-axis)

Digital Trimpot for stepper current control

Current limit on driver IC VCC to prevent permanent latchup

Microstep mode configured by MCU through firmware (no jumpers needed)

Test points for driver control signals

Step and Direction pins are on their own ports for synchronous movement capability

Extra driver ports broken out for up to 3 additional drivers (some of the motor extension pins are shared with max endstop and a pin allocated for SPI-SS extensions)

PWM DC outputs (Extruders, Fans, Etc.)

6 outputs

Low resistance mosfets for cool running

Indicator led for each channel

Power

Three independent power rails

Heated Bed, 15A 12-35V

SKU
KT-CP0131 (LulzBot)

Vendor Pricing & Availability

LulzBot

Updated: 3 hours ago

$250.00

Free Shipping

Buy Now →

Store links may be affiliate links: we may earn a commission at no extra cost to you.

Advertisement

Price history

Lowest price each day

$250

Collecting price history

We have one day of prices so far. The trend line appears after at least two days.

View as table
Date LulzBot
Nov 17, 2026 $250

Advertisement

Zeb · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.

Eck · 1d ago

Message hidden until you log in.

7 recent messages, hidden until you log in. Log in or sign up to read the chat and join in.

Send private messages to other members.

Log in