Raise3D Draft Grey Resin 1kg

Description

Raise3D Draft Grey Resin

Benefits

Fast printing speed
High printing success rate
Low viscosity
Smooth surface
Easy to clean

Applications

Rapid prototypes validation
High throughout parts
Industrial design parts
Art and sculpture display parts, etc

Material Properties*

*All test samples are printed on Raise3D DF2 printer (405nm wavelength, 2.3mW/cm², 200 μm layer thickness, exposure time 5 seconds) and cured for 10 minutes on the front and back of the sample with DF Cure.
See more details in Technical Data Sheet.

Properties Testing Method Green Post-Cured Tensile Strength

ASTM D638

27.7 MPa

56.5 MPa

Young’s Modulus

ASTM D638

0.95 GPa

2.9 GPa

Elongation at Break

ASTM D638

16.7%

8.31%

Flexural Strength

ASTM D790

61.2 MPa

98.1 MPa

Flexural Modulus

ASTM D790

1.67 GPa

3.3 GPa

Notched Izod

ASTM D256

18.0 J/m

18.4 J/m

Heat Deflection [email protected] MPa

ASTM D648

49°C

96°C

Printing Settings

Gently shake the resin bottle before printing to mix the resin evenly and then import it into the resin tank for printing, otherwise it will affect the appearance effect and material performance of the final printed part.

It is recommended to use the default printing profiles available in ideaMaker.

After printing, it’s recommended to not leave a successful but unwashed model in the printer for too long. This will prevent the model from over-swelling, which may cause dimensional deviations or support softening.

Cleaning

Draft Grey Resin requires cleaning to achieve the ideal properties of the printed part.
There is no need to remove support structures from the printed part, and the part should then be washed before post-curing, until the surface is free of any solvent residue.
For special structures or fine details, such as small holes, it’s recommended to clean manually, then blow dry the part with compressed air/nitrogen to remove residual solvent from the surface, or leave the part for a short time at room temperature to dry. Post-cure the model until the surface is free of any solvent residue.
Please refer to the chart on the right for the recommended washing parameters with Raise3D DF Wash

Recommended washing parameters:
Wash Time: 5 min
Wash Drying Time: 10 min

Post-curing

After cleaning, Draft Grey parts require post-curing to achieve optimal properties. Please refer to the chart on the right for the parameters with Raise3D DF Cure.

UV Curing Time : 20 min
Heat Curing Time: 0
Heat Curing Temperature: N/A

Download Product Documents

TDS

SDS

SKU
900-0144 (3D Universe)

Vendor Pricing & Availability

Sold at 2 stores, cheapest first.

Raise3D

Updated: 1 hour ago

$49.99

Free Shipping

Buy Now →

3D Universe

Updated: 5 hours ago

$49.99

Free Shipping

Buy Now →

Store links may be affiliate links: we may earn a commission at no extra cost to you.

Sort:

Advertisement

Price history

Lowest price each day, by store

  • 3D Universe $49.99
  • Raise3D $49.99 ■0%
View as table
Date 3D Universe Raise3D
Nov 18, 2026 $49.99 $49.99
Nov 17, 2026 — $49.99

Raise3D Draft Grey Resin 1kg price history: the price has held at $49.99 since Nov 17, 2026. The lowest price we've tracked is $49.99 (Nov 17, 2026), and we've followed it since Nov 17, 2026.

Advertisement

Zeb · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.

Eck · 2d ago

Message hidden until you log in.

7 recent messages, hidden until you log in. Log in or sign up to read the chat and join in.

Send private messages to other members.

Log in