PPS-GF20 - 750g / Gray HEX Code #75787b

Description

QIDI PPS-GF20

Born to tackle the most demanding engineering challenges. PPS-GF20, combining exceptional heat resistance, outstanding dimensional stability, and top-tier electrical insulation properties, is your ultimate choice for achieving innovation and reliability in electronics, aerospace, automotive manufacturing, and high-end industrial applications.

Flame-retardant and chemically resistant

UL94 V0 certified at a thickness of 1.5mm, resistant to acids, alkalis, oils, and solvents.

Chemical Resistance of PPS-GF Material

Category
Excellent Resistance
Limited Resistance / Not Recommended

Acids

✅

Acids

Hydrochloric acid, phosphoric acid, acetic acid, etc.

⚠️

Strong oxidizing acids

Nitric acid, hot concentrated sulfuric acid, chromic acid

Alkalis

✅

Alkalis

Sodium hydroxide, potassium hydroxide, ammonia water

⚠️

Certain strong polar solvents

Nitrobenzene, aniline

Solvents

✅

Solvents

Alcohols, ketones, esters, hydrocarbons, halogenated hydrocarbons

Oils & Lubricants

✅

Oils, fuels, lubricants

Water & Steam

✅

Hot water and steam

Excellent Insulation Performance

Boasting a high dielectric strength of 6.1 kV/mm and a low dielectric constant (2.7 @ 1MHz), it provides a solid protective barrier for applications such as 5G base station components, ADAS sensor housings, and electrical insulators.

Exceptional High-Temperature Resistance

Maintains excellent structural strength and shape even in extreme environments up to 240°C (Heat Deflection Temperature).

High Strength and Rigidity

Filled with 20% glass fiber, it reduces material shrinkage while providing printed parts with strength and rigidity (Young's modulus up to 4600 MPa, XY flexural strength up to 105 MPa). Especially suitable for brackets, antenna bases, chemical contact parts, and other components with stringent requirements for strength and stiffness.

Precision, Reliability, and Easy Printing

Supports high-speed printing . Extremely low shrinkage and excellent dimensional stability ensure printed parts maintain precise dimensions from the first layer to the last, enabling easy creation of tightly fitting assemblies and high-precision gear sets.

Ultra-Low Water Absorption

PPS-GF exhibits an extremely low moisture absorption rate of just 0.05%, maintaining stable mechanical and thermal properties even in humid environments. This makes it an ideal choice for high-moisture resistance applications.

Equipped with RFID chip

Equipped with RFID chip, parameters are automatically identified, saying goodbye to manual settings.

Accessory Compatibility

Category
Recommended
Not Recommended

Multi-color printing system
QIDI BOX
/

Build Plate
QIDI PEI Plate, QIDI Smooth Plate, QIDI Cool Plate, HF Plate, PC Plate
/

Nozzle

Hardened Steel Nozzle (0.4 / 0.6mm)

Bimetal Nozzle (0.4 / 0.6/0.8mm)

Tungsten Carbide Bimetal Nozzle (0.4 / 0.6/0.8mm)

Brass/Copper plated Nozzle (0.2/0.4 / 0.6/0.8mm)

Any 0.2mm size Nozzle

Recommended Printing Settings

Drying Settings (Blast Drying Oven)
100 °C,8-10 h

Nozzle Temperature
300-350 °C

Bed Temperature
80-100 °C

Printing Speed
20-150 mm/s

Physical Properties

Density
1.36 g/cm³

Melt Flow Rate
27 g/10min

Vicat Softening Temperature
272.5°C

Heat Deflection Temperature
236.3°C

Mechanical Properties

Tensile Strength(X-Y)
64.1±2.1 MPa

Tensile Modulus (X-Y)
4552.0±54.6 MPa

Elongation at Break (X-Y)
2.0±0.2%

Impact Strength (X-Y)
27.3±1.1 kJ/㎡

Downloads

Filament TDS

Filament MSDS

Printing Tips

Equipment Requirements: The hot end operating temperature must be set between 310°C and 350°C . Higher temperatures result in greater filament strength, but print quality will decrease with increasing temperature.
Hardened steel or higher-grade nozzles are recommended to withstand fiberglass abrasion.

Material Handling: Ensure the filament is thoroughly dried before printing to prevent print failure.
To prevent moisture absorption, use a sealed storage container with a desiccant during printing.
When not in use, the material must be sealed and stored in a dry environment.

Post-Processing: Annealing the printed parts can significantly improve their mechanical properties and thermal stability. However, some prints may warp or deform, especially larger or thinner prints.
Recommended annealing conditions: 130°C for 10 hours.

QIDI BOX Usage Tips: Since this filament uses a cardboard spool, it is recommended to use a spool adapter (ABS Filament is recommended) on the cardboard spool when printing this filament with QIDI BOX to prevent the spool from being unable to rotate during material ejection.

📚For more details please refer to: Engineering Filament Guide on WIKI.

Vacuum Aluminum Foil Packaging

According to the test, the water vapor transmission rate of ordinary sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant.

Product Size

QIDI TE

SKU
046GRY-1-750 (QIDI Tech)

Vendor Pricing & Availability

QIDI Tech

Updated: 4 hours ago

$59.99

Free Shipping

Buy Now →

Store links may be affiliate links: we may earn a commission at no extra cost to you.

Sort:
Sort:
Sort:

Advertisement

Price history

Lowest price each day

$59.99

Collecting price history

We have one day of prices so far. The trend line appears after at least two days.

View as table
Date QIDI Tech
Nov 16, 2026 $59.99

Advertisement

Zeb · 7h ago

Message hidden until you log in.
B

bob · 7h ago

Message hidden until you log in.
B

bob · 6h ago

Message hidden until you log in.
B

bob · 6h ago

Message hidden until you log in.
B

bob · 6h ago

Message hidden until you log in.
B

bob · 6h ago

Message hidden until you log in.

Eck · 24m ago

Message hidden until you log in.

7 recent messages, hidden until you log in. Log in or sign up to read the chat and join in.

Send private messages to other members.

Log in