PETG Rapido - 1 Kg / Blue HEX Code #00187F
Description
QIDI PETG Rapido
QIDI PETG Rapido is designed for extreme speed. Its excellent flow and cooling properties allow it to stably support high-speed printing of 300mm/s, while maintaining a strong and efficient balance.
Durable, Waterproof, and Weather-Resistant
QIDI PETG Rapido has good waterproof and weather resistance, can resist the effects of moisture and ultraviolet rays, and is suitable for short-term outdoor use or functional parts.
Balanced Physical Properties
QIDI PETG Rapido retains the inherent strength of regular PETG. It is tougher, more durable, and more resistant to high temperatures than PLA.
Enhanced fluidity and cooling properties
Its improved flowability and cooling stability make it an ideal choice for structural prints that require added strength and stability, with good structural integrity to meet your specific design requirements.
Fast printing, improved efficiency
Print speeds of up to 300mm/s allow you to print faster without compromising quality, allowing you to increase productivity and efficiency.
Equipped with RFID chip
Equipped with RFID chip, parameters are automatically identified, saying goodbye to manual settings.
Accessory Compatibility
Recommended
Not Recommended
Multi-color printing system
QIDI BOX
/
Support Filament
PLA Basic
/
Build Plate
QIDI PEI Plate, QIDI Smooth Plate, QIDI Cool Plate, HF Plate, PC Plate
/
Nozzle
Brass/Copper plated Nozzle (0.2/0.4 / 0.6/0.8mm)
Hardened Steel Nozzle (0.2/0.4 / 0.6mm)
Bimetal Nozzle (0.2/0.4 / 0.6/0.8mm)
Tungsten Carbide Bimetal Nozzle (0.2/0.4 / 0.6/0.8mm)
/
Recommended Printing Settings
Drying Settings (Blast Drying Oven)
60-65 °C,5-8 h
Nozzle Temperature
240-275 °C
Bed Temperature
70-80 °C
Printing Speed
20-320 mm/s
Physical Properties
Density
1.31 g/cm³
Melt Flow Rate
5~10g/10min
Vicat Softening Temperature
83°C
Heat Deflection Temperature
70℃
Mechanical Properties
Tensile Strength(X-Y)
47 MPa
Tensile Modulus (X-Y)
2000 MPa
Elongation at Break (X-Y)
10 %
Impact Strength (X-Y)
39 KJ/m²
Downloads
Filament TDS
Filament MSDS
Printing Tips
Pre-printing Drying: PETG is highly hygroscopic.Moist filament may cause stringing and reduced strength during printing.It is recommended to dry at 65°C for 5-8 hours.For extended prints, using a dry box or continuous drying during printing is advised.
📚For more details please refer to: Filament Guide on WIKI.
Vacuum Aluminum Foil Packaging
According to the test, the water vapor transmission rate of ordinary sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant.
Product Size
QIDI TECH PETG Rapido Filament 1.75mm Works perfectly with most FDM 3Dprinters on the market.
- SKU
- 041BLU-1-1000 (QIDI Tech)
Vendor Pricing & Availability
QIDI Tech
Updated: 8 hours ago
$17.99
Free Shipping
Store links may be affiliate links: we may earn a commission at no extra cost to you.
Advertisement
Price history
Lowest price each day
$17.99
Collecting price history
We have one day of prices so far. The trend line appears after at least two days.
View as table
| Date | QIDI Tech |
|---|---|
| Nov 16, 2026 | $17.99 |
Advertisement