PETG-CF - 1 Kg / Black HEX Code #000000
Description
QIDI PETG-CF
QIDI PETG-CF Filament: Strong, Rigid & Easy to Print, It combines the ease of use of PETG with the strength of carbon fiber, resulting in prints that are significantly more rigid, sturdy, and resistant to bending. It offers excellent dimensional stability, precise details, and a premium matte textured finish.
Enhanced Heat & Chemical Resistance
This material inherits PETG's excellent resistance to most oils, greases, and detergents.
Its heat deflection temperature is slightly higher than that of standard PETG, allowing it to be used in higher temperature environments.
High Strength & Stiffness
The printed parts are stronger and harder than ordinary PETG or PLA, approaching the performance of some engineering plastics.
150mm/s High-Speed Printing
Say goodbye to long waits! PETG-CF supports high-speed printing at 150mm/s, helping you take the manufacturing efficiency of high-strength parts to a new level and achieve twice the result with half the effort.
Matte, Industrial Finish
The carbon fiber gives the finished product a unique matte, frosted texture with a subtle grain texture on the surface, making the appearance more "industrial" and high-end.
Easy to Print & Beginner-Friendly
Adding chopped carbon fiber provides greater dimensional stability and low shrinkage, increasing the success rate of printing large models.
Equipped with RFID chip
Equipped with RFID chip, parameters are automatically identified, saying goodbye to manual settings.
Accessory Compatibility
Recommended
Not Recommended
Multi-color printing system
QIDI BOX
/
Support Filaments
PLA Basic
/
Build Plate
QIDI PEI Plate, QIDI Smooth Plate, QIDI Cool Plate, HF Plate, PC Plate
/
Nozzle
Hardened Steel Nozzle (0.4 / 0.6mm)
Bimetal Nozzle (0.4 / 0.6/0.8mm)
Tungsten Carbide Bimetal Nozzle (0.4 / 0.6/0.8mm)
Brass/Copper plated Nozzle (0.2/0.4 / 0.6/0.8mm)
Any 0.2mm size Nozzle
Recommended Printing Settings
Drying Settings (Blast Drying Oven)
65 °C,5-8 h
Nozzle Temperature
240-270 °C
Bed Temperature
70-80 °C
Printing Speed
20-150 mm/s
Physical Properties
Density
1.31 g/cm³
Melt Flow Rate
8~14g/10min
Vicat Softening Temperature
83°C
Heat Deflection Temperature
77℃
Mechanical Properties
Tensile Strength(X-Y)
57 MPa
Tensile Modulus (X-Y)
3700 MPa
Elongation at Break (X-Y)
7 %
Impact Strength (X-Y)
30 KJ/m²
Downloads
Filament TDS
Filament MSDS
Printing Tips
Pre-printing Drying: PETG-CF is highly hygroscopic.Moist filament may cause stringing and reduced strength during printing.It is recommended to dry at 65°C for 5-8 hours.For extended prints, using a dry box or continuous drying during printing is advised.
Nozzle Recommendation: The glass fiber content is highly abrasive and can quickly wear down standard brass nozzles, leading to nozzle enlargement and extrusion inaccuracies.A hardened steel nozzle or harder is recommended.
📚For more details please refer to: Filament Guide on WIKI.
Vacuum Aluminum Foil Packaging
According to the test, the water vapor transmission rate of ordinary sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant.
Product Size
QIDI TECH PETG-CF Filament 1.75mm Works perfectly with most FDM 3Dprinters on the market.
- SKU
- 042BLK--1-1000 (QIDI Tech)
Vendor Pricing & Availability
QIDI Tech
Updated: 5 hours ago
$28.99
Free Shipping
Store links may be affiliate links: we may earn a commission at no extra cost to you.
Advertisement
Price history
Lowest price each day
$28.99
Collecting price history
We have one day of prices so far. The trend line appears after at least two days.
View as table
| Date | QIDI Tech |
|---|---|
| Nov 16, 2026 | $28.99 |
Advertisement