PET-CF Filament - 1 kg

Description

QIDI PET-CF 3D Printer Filament

QIDI PET-CF is specially developed for FDM 3D printing process. Its substrate material is PET engineering plastic with low moisture absorption, high strength, creep resistance, excellent chemical resistance and high heat resistance. With good dimensional stability, no warpage and no shrinkage and no smell, no heating chamber is required during the printing process. It can be used with QIDI S-White Support Material to solve the problem of poor molding effect on the supporting surfaces of complex models.

Smooth High-speed Printing

QIDI PET-CF Filaments prints out models with great gloss and beautiful texture.

Smart Fiber Reinforced Technology

QIDI Smart Fiber Reinforcement Technology significantly improves the mechanical properties and heat resistance of the material and releases internal stresses through the fiber mesh structure during the printing process, resulting in good dimensional stability of the printed part without warping.

Low Creep

The molecular chain structure of PET is highly regular and has a rigid benzene ring structure, so that PET has better mechanical properties and less deformation under long-term load. Compared with PA and PC materials, PET has better creep-resistance.

High Mechanical Strength

PET filament carbon fiber has higher strength and rigidity, Better impact Resistance,and Wear Resistance than regular PETG material.Suitable for applications requiring torsional, tensile, and impact strength.

Low Moisture Absorption

QIDI PET-CF has the characteristics of low moisture absorption, and the moisture absorption of this carbon fiber reinforced PET is only 0.5%.Moisture has no effect on the mechanical properties and dimensional stability of QIDI PET-CF.

Accessory Compatibility

Category
Recommended
Not Recommended

Multi-color printing system
QIDI BOX
/

Support Filament
S-white
/

Build Plate
QIDI PEI Plate, HF Plate and Smooth Plate
PC Plate

Hotend

Hardened Steel Nozzle (0.4 / 0.6 / 0.8 mm)

Bimetal Nozzle (0.4 / 0.6 / 0.8 mm)

Brass/Copper plated Nozzle (0.2/0.4/0.6/0.8 mm)

Glue
Glue Stick / 3D LAC adhesive spray
/

Recommended Printing Settings

Drying Temperature and Time
100°C / 10 h

Nozzle Temperature
270-300°C

Bed Temperature
70-80°C

Printing Speed
Up to 300 mm/s

Physical Properties

Density
1.34 g/cm³ at 23°C

Melt Flow Rate
30.7 g/10 min

Vicat softening temperature

242.5°C

Heat deflection temperature (0.45 MPa)

155.3°C

Mechanical Properties

Tensile breaking strength (X-Y)

64.1 ± 1.1 MPa

Tensile Modulus (X-Y)

5629 ± 78.4 MPa

Elongation at Break (X-Y)

2.2 ± 0.5%

Charpy impact strength (X-Y)

25.3 ± 1.3 kJ/m²

Downloads

Filament TDS

Filament MSDS

Printing Tips

• Although the moisture absorption of PET material is very low, it is very sensitive to moisture. Printing after absorbing moisture will result in oozing, extruding with bubbles and rough surface appearance, thus reducing print quality. It is recommended that put the filament into a dry box (humidity below 15%) immediately after opening the QIDI PET-CF vacuum foil bag for printing. Please put the unused filament back into the original aluminum foil bag for sealed storage.
• After the printing, the printed part can be annealed to further improve the strength of QIDI PET-CF print part. Annealing conditions: place the printed part at 80-100°C for 4-8 hours and cool to room temperature naturally.
•QIDI BOX Usage Tips: Since this filament uses a cardboard spool, it is recommended to use a spool adapter (ABS Filament is recommended) on the cardboard spool when printing this filament with QIDI BOX to prevent the spool from being unable to rotate during material ejection.
For more details please refer to: Filament Guide on WIKI.

Vacuum Aluminum Foil Packaging

According to the test, the water vapor transmission rate of ordinary sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant.

Product Size

QIDI TECH PET-CF filament 1.75mm works perfectly with most FDM 3D printers on the market.

SKU
PET-CF (QIDI Tech)

Vendor Pricing & Availability

QIDI Tech

Updated: 7 hours ago

$39.99

Free Shipping

Buy Now →

Store links may be affiliate links: we may earn a commission at no extra cost to you.

Sort:
Sort:
Sort:

Advertisement

Price history

Lowest price each day

$39.99

Collecting price history

We have one day of prices so far. The trend line appears after at least two days.

View as table
Date QIDI Tech
Nov 16, 2026 $39.99

Advertisement

Zeb · 10h ago

Message hidden until you log in.
B

bob · 10h ago

Message hidden until you log in.
B

bob · 9h ago

Message hidden until you log in.
B

bob · 9h ago

Message hidden until you log in.
B

bob · 9h ago

Message hidden until you log in.
B

bob · 9h ago

Message hidden until you log in.

Eck · 3h ago

Message hidden until you log in.

7 recent messages, hidden until you log in. Log in or sign up to read the chat and join in.

Send private messages to other members.

Log in