PAHT-GF (PPA-GF) Filament - 1 kg / BLUE HEX Code #7CA6DE

Description

QIDI PAHT-GF (PPA-GF) Filament

QIDI PAHT-GF is specially developed for FDM 3D printing process. The base material is high-temperature nylon, compounded with 15% glass fiber, and a mesh skeleton structure is formed inside. It has the characteristics of low moisture absorption, high strength, high wear resistance, excellent chemical resistance and high heat resistance. It has good dimensional stability during printing, no warping and shrinkage, exquisite matte surface, and more diverse colors.

Stable mechanical properties

The addition of glass fiber significantly improves the mechanical strength of the material and solves the problem of warping and shrinkage in PPA printing. It also provides more color options and is suitable for manufacturing high-load materials with color requirements.

Filament
PA12-CF
PAHT-F
UltraPA-CF25
PAHT-GF

Bending strength (X-Y,Annealed)
124 MPa
157 MPa
168 MPa
137 MPa

Bending modulus (X-Y,Annealed)
4305 MPa
6983 MPa
7466 MPa
4135 MPa

High Heat Resistance

Smart Fiber Reinforced Technology greatly improves the heat resistance of the material, allowing your work to maintain stable performance in high temperature environments, suitable for application scenarios that require heat resistance.

Filament
PA12-CF
PAHT-CF
UltraPA-CF25
PAHT-GF

Heat Deflection Temperature(0.45MPa)
138.2°C
190.7°C
196.9°C
180.0°C

Low Moisture Sensitivity

QIDI PAHT-GF based on modified high temperature nylon, whose saturated moisture absorption rate is only one tenth of ordinary PA6, completely solving the defects of the mechanical properties and dimensional stability of nylon materials that change greatly after absorbed moisture.

Filament
PA12-CF
PAHT-CF
UltraPA-CF25
PAHT-GF

Water absorption
2.46%
1.37%
1.09%
1.75%

Super Abrasive Resistance

QIDI PAHT-GF has a low coefficient of friction, self-lubricating properties and excellent wear resistance, which can easily meet all kinds of high-strength gears or industrial applications with high wear requirements.

Accessory Compatibility

Recommended
Not Recommended

Multi-color printing system
QIDI BOX
/

Spport
S-white
/

Build Plate
QIDI Cool Plate pro, QIDI PEI Plate, HF Plate , Smooth PEI Plate, HF Plate, PC Plate
/

Hotend

Hardened Steel Nozzle ( 0.4 / 0.6 / 0.8 mm)

Bimetal Nozzle ( 0.4 / 0.6 / 0.8 mm)

Tungsten Carbide Bimetal Nozzle( 0.4 / 0.6 / 0.8 mm)

Brass/Copper plated Nozzle (0.2/0.4/0.6/0.8 mm)

Glue
Glue Stick / 3D LAC adhesive spray
/

Recommended Printing Settings

Drying Settings (Blast Drying Oven)
80-100 °C,4-8 h

Printing and Keeping Container's Humidity
< 15% RH (Sealed, with Desiccant)

Nozzle Temperature
300 - 320 °C

Bed Temperature (with Glue)
70-90 °C

Printing Speed
30-160 mm/s

Physical Properties

Density
1.27 g/cm³

Water absorption
1.75%

Heat Deflection Temperature
80 °C

Melting Temperature
237°C

Melt index
7.6 g/10 min

Mechanical Properties

Tensile strength(X-Y)
86.49±1.03 MPa/90.50±2.57 MPa

Elongation at break (X-Y)
1.78±0.07 %

Bending Modulus
4135.14±64.91 MPa/4897.64±136.40 MPa

Bending Strength
137.78±2.35 MPa/140.77±5.28 MPa

Impact Strength
7.29 ± 0.76 KJ/㎡

Downloads

Filament TDS

Filament MSDS

Printing Tips

1.Nylon material is very easy to absorb moisture within the environment, and printing after absorbing moisture will result in oozing, extrusion with bubbles and rough surface appearance, thus reducing print quality. It is recommended that put the filament into a dry box (humidity below 15%) immediately after opening the QIDI PAHT-GF vacuum foil bag for printing. Please put the unused filament back into the original aluminum foil bag for sealed storage.
2. After the material is damp, there will be more printing oozing, bubbles extruded and rough printing surface. Please dry the filament in an oven at 80-100℃ for 4-6h to restore the printing quality of QIDI PAHT-GF.
3. It is recommended to use hardened steel and above grade nozzles, which can effectively improve the print quality. Besides, it is recommended that the thickness of the heating block is longer 12mm.
4. After the printing is completed, the QIDI PAHT-GF printed part can be annealed to further improve the strength of print part. Annealing conditions: leave printing part in an oven at 80-100℃ for 4 to 8 hours and cool to room temperature naturally.
5.The filament has a high content of short-cut glass fiber and has been factory-dried, which makes it more brittle and prone to breaking. This is a normal phenomenon.
For more details please refer to: Filament Guide on WIKI.

Vacuum Aluminum Foil Packaging

According to the test, the water vapor transmission rate of ordinary sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant.

Product Size

QIDI TECH PAHT-GF filament 1.75mmWorks perfectly with most FDM 3Dprinters on the market.

SKU
PAHT-GFBLUE (QIDI Tech)

Vendor Pricing & Availability

QIDI Tech

Updated: 12 hours ago

$62.99

Free Shipping

Buy Now →

Store links may be affiliate links: we may earn a commission at no extra cost to you.

Sort:
Sort:
Sort:

Advertisement

Price history

Lowest price each day

$62.99

Collecting price history

We have one day of prices so far. The trend line appears after at least two days.

View as table
Date QIDI Tech
Nov 16, 2026 $62.99

Advertisement

Zeb · 15h ago

Message hidden until you log in.
B

bob · 15h ago

Message hidden until you log in.
B

bob · 14h ago

Message hidden until you log in.
B

bob · 14h ago

Message hidden until you log in.
B

bob · 14h ago

Message hidden until you log in.
B

bob · 14h ago

Message hidden until you log in.

Eck · 8h ago

Message hidden until you log in.

7 recent messages, hidden until you log in. Log in or sign up to read the chat and join in.

Send private messages to other members.

Log in