Micron Plus 180 Self-Source Configurator by West3D (Printers for Ants)
Description
There should be no other Micron like YOUR Micron, so stop buying a kit to build someone else's Micron. Welcome to West3D's signature Configurator for the Micron 180.
This is offered as a pre-sale, expect a pre-shipment notification in about 4 weeks following your order. Due to the nature of configurators we may discuss potential alternatives to get your kit out faster
ONLY AT WEST3D - We are giving you a free name plate for every kit you get serial'd!
.
What is a Configurator?
The only way to really make your printer is to either:
1. Buy a kit, and replace a bunch of parts you didn't like (quality, type, performance). This is costly, and you end up with a bunch of waste, and a hodgepodge of items you may or may not need to get your printer working.
2. Self-Source, this route is tried and true, but it's a pain in the butt - and expensive.
With West3D's signature configurator get rid of all that messy sourcing work, we've done it for you, here is our version of the 'easy button'. We've put together what we feel is the best quality and most complete base kit on the market by some distance (see BOM below) and left the benefits of self-sourcing intact so you can make the Micron that is the best fit for you. This configurator gives you the benefit of a large order discount, saves you sourcing 'screen-time', all with the benefit of working with a US based source who can provide prompt support.
Unlike other Micron Kits, this comes with a custom designed wiring harness we put together and tested (please let us know if you recommend any changes!), a Raspberry Pi, Hot End, Electronics - everything really except for printed parts and tools you need to build your kit. (Note, still this is a configurator, there is a possibility you may need additional fasteners, wire etc. if you deviate too far from the chosen path).
To be successful at building a Micron Plus using this configurator you will require working knowledge of 3D Printers, electronics, wiring/crimping, coding and have patience (amongst we're sure other things.)
If there are configurations you'd like to see added please let us know ([email protected]).
For specific STLs and information about our configurator, please visit our github
Please note:
We are stocking up on products to provide a steady supply, this is currently offered as Pre-sale. We are waiting on custom designed edge to edge heaters, but besides that our kits are ready to ship. Based on your selection it is possible we will not have all products available in warehouse and will be waiting on shipment before your order can ship out. If this occurs we will reach out approximately 1 week following your order to inform you.
When we are NOT in Pre-sale, this item is expected to ship in about 1 week after the order is placed. For Pre-Sales, we ask you to please expect roughly 4 weeks for shipment, though this is not a guarantee. Pre-sales are refundable up until the date of shipment less a 3.5% transaction fee (the approximate cost we incur). Configurator orders are not eligible for additional promotional offers.
Removing the hot-end means you will not receive a heater cartridge and thermistor, if you need those please add them manual from our product listings. PLEASE NOTE - the below has been changed a little bit to be compatible with the updated Micron R1. Please use this as a guide but understand some things have changed (e.g. MGN9H instead of MGN9C rail carriage for toolhead).
Category
Component
QTY
Removable
Configurable
Note
Hardware
SS304 BDF Fastener Kit
1
Yes
No
Motion
F623-2RS Bearings
32
No
Yes
Berserker Motion Upgrade
625 2RS Bearings
8
Yes
Yes
5x50mm Shaft - Ground Flat
4
No
No
Linear Rail MGN7H
6
Yes
No
Berserker Upgrade included - pleae don't skim out on rails. Future upgrade for high temp variant may be availble.
Configurable if using BOOP (near future)
Linear Rail MGN9C
1
Yes
Yes
KGLM-03 Bearings
4
Yes
No
IGUS - it's the best
GT2 16T Pulley (5mm bore, 6mm wide)
14
No
Yes
Gates Configuration Option (In Berserker Motion Upgrade)
GT2 Belt Loop (6mm wide) - 188mm
4
No
Yes
GT2 Open Belt LL-2GT-6 (6mm wide)
6000
No
Yes
Gates EPDM (in Berserker Motion Kit)
Vibration Management
Rubber feet
4
No
No
Electronics
Octopus
1
No
Future
Testing Leviathan
TMC 2209 stepper driver
7
No
Future
Testing Leviathan
Raspberry Pi 3B+ or Better
1
Yes
No
Micro SD Card
1
No
No
LDO Micron Motor Kit
1
Yes
Future
Testing other options, space is at a premium, but moons upgrade possible at later date
3010 24V Axial Fan
1
Yes
Future
Testing Berserker Vindr
4010 Blower Fan
2
Yes
Future
Testing Berserker Vindr
4010 Axial fan
2
Yes
Future
Testing Berserker Vindr
Omron D2F switch
3
No
No
C13 Power Cable
1
No
No
AC inlet - Adam Tech IEC-GS-1-100
1
No
No
5x20mm 10a fuse
1
No
No
Meanwell UHP-200
1
Yes
No
If you have suggestions of other PSU's that work let us know, space is at a premium
Rapdio HF Hot End
1
Yes
Yes
Revo, Rapido UHF, Dragonfly, other options coming...
VHB Tape
1
No
- SKU
- WES1594 (West3D)
Vendor Pricing & Availability
West3D
Updated: 2 hours ago
$849.99
Free Shipping
Store links may be affiliate links: we may earn a commission at no extra cost to you.
Advertisement
Price history
Lowest price each day
$850
Collecting price history
We have one day of prices so far. The trend line appears after at least two days.
View as table
| Date | West3D |
|---|---|
| Nov 17, 2026 | $850 |
Advertisement