Magigoo 3D Printing Adhesive - Magigoo PP 50ml
Description
Overview
Magigoo Build Plate Compatibility
Magigoo adhesives work on heated build-plates, with glass surfaces giving the best results. This includes a variety of glass types such as normal glass, borosilicate glass and ceramic glass.
Other common surfaces such as PEI, Buildtak (PC), Garolite, and Kapton tape show similar levels of adhesion to glass build-plates when Magigoo adhesives are used. This is true for the vast majority of 3D printing materials.
The use of Magigoo can also extend the life of your build-plate surface. The adhesive in fact acts as an intermediate layer between the build-plate material and the print.
Master Your Materials
Magigoo will change your 3D printing experience completely! No more failed prints due to warping. No more fighting to get parts off the build plate. With Magioo, even challenging materials stick firmly to the build plate while printing but release easily after the build plate cools.
The Magigoo team has done a great deal of testing and has created some great documentation. Refer to the Magigoo Manual for detailed guidance. Also, refer to this database of all materials that have been tested by the Magigoo team, which includes detailed guidance for each material.
See below for details about all of the different Magigoo types available.
Magigoo Original (50ml or 120ml)
Magigoo is an easy-to-use 3D printing adhesive designed to provide excellent print bed adhesion for a variety of 3D printing materials. Apply Magigoo to your unheated print bed. When the print is finished, wait for the plate to cool down and your prints will pop right off the bed! Magigoo also helps to prevent warping, even with more challenging materials like ABS and ASA.
Key features include:
Compatible with ABS, PLA, PETG, HIPS, ASA, and TPU
Available in 50ml and 120ml sizes
Easy application
Easy release
Easy cleaning (just use water)
No smell
Non-toxic
No additional tools needed
Easy to transport
Nicer print finish
Magigoo PA (50ml)
Magigoo PA is designed for professional use, to work exclusively with Polyamide (nylon) filaments. Parts will be relatively easy to remove once the print bed cools. Magigoo residue can be easily cleaned off using a wet cloth.
Nylon filaments prove to be challenging materials for FDM printing due to their lower adhesion to conventional 3D printing build surfaces and their higher tendency to warp. Furthermore, there are several classes of PA filaments, each behaving differently. Magigoo PA is a specialized solution for FDM printing of PA filaments which was developed to work with a wide number of PA types.
Magigoo PC (50ml)
Magigoo PC is designed to work exclusively with polycarbonate type filaments. This adhesive for professional use makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the bed cools down.
Magigoo PP (50ml)
Polypropylene is an especially challenging 3D printing material due to its tendency to warp. It normally requires using special adhesion sheets or a layer of clear packing tape applied to the print bed.
Magigoo PP eliminates the need for adhesion sheets or clear packing tape when using polypropylene filament. Parts are relatively easy to remove once the print bed cools, and the Magigoo residue can be easily cleaned off if the included procedure is followed. (See "How to Use Magigoo Adhesives" section below)
Magigoo PP-GF (50ml)
Magigoo PP-GF is designed to work exclusively with glass reinforced polypropylene (PP-GF) filaments. This adhesive makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools.
Magigoo PP-GF has been designed and tested to work with 30% glass fiber filled Polypropylene.
Magigoo Flex (50ml)
MAGIGOO Flex is designed for professional use, to work exclusively with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer and TPC (thermoplastic copolyester) filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.
Some flexible filaments show lower adhesion to conventional 3D-printing build surfaces and a high tendency to warp. Others tend to stick too well to bare 3D printing surfaces such as glass and PEI. MAGIGOO Flex is a specialized solution for FDM printing of flexible filaments which was developed to work with a wide number of flexible filament types. MAGIGOO Flex acts as an intermediate layer between the build-plate and the printed part enabling good adhesion and facilitating print removal as required.
Magigoo HT (50ml)
MAGIGOO HT is designed for professional use, to work at high printing temperatures. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.
High temperature filaments prove to be challenging materials for F
- SKU
- MAGIGOO-PP (3D Universe)
Vendor Pricing & Availability
3D Universe
Updated: 5 hours ago
$27.00
Free Shipping
Store links may be affiliate links: we may earn a commission at no extra cost to you.
Advertisement
Price history
Lowest price each day
$27.00
Collecting price history
We have one day of prices so far. The trend line appears after at least two days.
View as table
| Date | 3D Universe |
|---|---|
| Nov 18, 2026 | $27.00 |
Magigoo 3D Printing Adhesive - Magigoo PP 50ml price history: the price has held at $27.00 since Nov 18, 2026. The lowest price we've tracked is $27.00 (Nov 18, 2026), and we've followed it since Nov 18, 2026.
Advertisement