Goliath Hot End by Mellow and VzBoT (Air or Water Cooled) - Air Cooled

Description

This is a serious hot end - if you want to maximize flow this is one to go with (in fact, we use it on our Tri-Zero!)

From GitHub:

A high-flow oriented hot end by the VzBoT-team and manufactured by Mellow3D

🔧 How does this go together? Goliath Assembly - VzBoT Docs)

🤔 What do I mount this on? Printed Vz-Printhead or CNC Vz-Printhead

🧺 Where can I buy one? Check the Resellers list

💨 Don't forget the Fan shrouds

Notes

The Nichrome wire sticking out can be bent to the desired shape. Be careful not to over do it as it can break if bent multiple times. Also keep in mind that this section of the heater will be hot, so place/bend it to a safe position.

PT1000 Sensor should be installed after the silicon sock. It should be tighen with hand or very gently with a wrench. It is M3 thread and too much torque can cause the thread to strip

Silicon sock is rated up to 300C. While the Goliath can technically handle up to 500C, you should always remove the silicon sock if you plan to use it for ultra high temp. A glass fiber sleeve could be use if you need to isolate it.

The heatblock can be rotated to have the wires facing the desired direction. You will need to dissasemble the unit to rotate it.

Silicon thermal paste can applied between the heatbreak and heatsink. Using other type of coumpound might make it really hard to remove heatbreak later.

Heatbreak is fragile and brittle but extremely tolerant to abrassion and heat. If you have issues removing it from the heatsink, you can help it by pushing from the top where the PTFE tube comes in. DO NOT try to pull hard on it from the bottom of the heatsink or you might seperate the zirconia throat from the copper section.

Water heatsink uses PL4-M5/PC4-M5 fitting type. Meaning that the thread size on the block is M5 and the tube OD is 4mm. You can switch to something else if you wish but it will need to be M5 thread type fittings.

Overview

Air cooled
Water cooled

Fan shrouds

The air-cooled Goliath heatsink need a fan to keep it cool. These shrouds let you mount a fan on to the Goliath air-cooled heatsink.

Generic fan shrouds

20mm x 10mm fan: Goliath fan shroud 2010

25mm x 10mm fan: Goliath fan shroud 2510

Vz-Printhead fan shrouds

For CNC Vz-Printhead: Goliath fan shroud 2510 - for CNC Vz-Printhead

For Printed Vz-Printhead: Goliath fan shroud 2510 - for Printed Vz-Printhead

Vz-Printhead on GitHub:

CNC VZ-Printhead

Printed VZ-Printhead

Can't find what you're looking for? Check out the user Mods repository.

Marketing images

Courtesy of Mellow3D

SKU
MEL3080AIR (West3D)

Vendor Pricing & Availability

West3D

Updated: 7 hours ago

$129.99

Free Shipping

Buy Now →

Store links may be affiliate links: we may earn a commission at no extra cost to you.

Sort:

Advertisement

Price history

Lowest price each day

$130

Collecting price history

We have one day of prices so far. The trend line appears after at least two days.

View as table
Date West3D
Nov 17, 2026 $130

Advertisement

Zeb · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.

Eck · 1d ago

Message hidden until you log in.

7 recent messages, hidden until you log in. Log in or sign up to read the chat and join in.

Send private messages to other members.

Log in