Filabot Reclaimer - Plastic Shredder & Granulator
Description
From scrap bin to feedstock
Every print lab generates waste—failed prints, purge towers, supports, out-of-spec filament. The Reclaimer is where the circular workflow starts. A top-load shredder takes prints and scrap down to chips, then a secondary granulator refines them into clean, uniform granulate ready for the EX3 or EX6 hopper. A VFD-driven drive train provides low-speed, high-torque cutting with jam-sense auto-reverse to keep material moving, and the control panel keeps operation simple with Start/Stop, Safety Reset and emergency-stop interlocks. Built for daily use, it features hardened, serviceable blades, straightforward access for cleaning and adjustments, and gas-spring-assisted hoppers for easy loading. Changeover between materials takes about 10–15 minutes: open the hoppers, vacuum out the remaining shavings, and grind the next material.
Key features
Two-stage size reduction — shredder breaks down prints and scrap; granulator refines to final, extrudable chip size.
Single-phase power — plugs into standard shop circuits (IEC 320-C14 inlet, up to 1,550 W).
Hardened cutting hardware — A2 hardened rotating blades with reversible 0.50" 4140 fixed blades; granulator drum uses 17-4 hardened stainless cutting teeth.
Jam detection and automatic reversing — low-speed (35 RPM), high-torque (216 ft-lb) final drive keeps material moving.
Shop-friendly form factor — approximately 125 lb for benchtop or floor placement in lab and shop environments; 60–70 dB, so most users locate it with their printers rather than in a classroom.
Durable, serviceable design — reversible fixed blades extend life and reduce downtime between maintenance cycles.
Part of the Filabot Modular Ecosystem
Every Filabot machine is a building block. The equipment is modular, so you can start with the workflow you need today and expand later—adding cooling, measurement, spooling, pelletizing or shredding—without replacing what you already own. All units are bench-top sized and run on standard 110 V single-phase power (no 3-phase required), so a complete line fits comfortably next to your 3D printers.
The Reclaimer covers the Reclaim stage and is included in the three Full Recycling Bundles. Filabot's recommended closed-loop workflow:
Reclaim — grind failed prints and scrap in the Reclaimer (keep polymer types separate; colors may be mixed).
Dry — dry the granulate (oven, desiccant or polymer dryer).
Extrude — run the granulate through the EX3 Filament Extruder, EX6 Standard Filament Extruder or EX6 Industrial Filament Extruder with the Airpath Filament Cooler and Spooler.
Pelletize — chop the first-pass strand into uniform pellets with the Pelletizer.
Extrude to final filament — re-extrude the pellets into print-ready filament and verify diameter with the Filameasure.
Filabot research shows PLA can be recycled this way many times over—blending in 20–50% virgin pellets extends it further.
Product
Stage
Role in the line
Reclaimer (this product)
Reclaim
Two-stage shredder + granulator turns failed prints and scrap into extrudable granulate.
EX3 Filament Extruder
Extrude
Accessible, compact extruder for education, makerspaces, recycling and early-stage material development.
EX6 Standard Filament Extruder
Extrude
Professional 24:1 extruder with four PID heat zones and 4+ kg/hr output for R&D and production.
EX6 Industrial Filament Extruder
Extrude
EX6 with nitrided barrel and screw for abrasive, filled and reinforced compounds.
Airpath Filament Cooler
Cool
Forced-convection cooling that stabilizes filament diameter before it reaches the Spooler.
Filameasure
Measure
Inline diameter gauge with Filalogger data logging; mounts to the Spooler.
Spooler
Spool
Pulls, traverses and winds finished filament onto 0.5 kg / 1 kg spools.
Pelletizer
Pelletize
Chops filament into uniform pellets for re-extrusion, compounding or injection molding.
Prefer a complete, pre-configured system?
Filabot bundles are priced below the sum of their parts:
EX3 Filament Maker Bundle — EX3 + Airpath + Spooler + Filameasure (with Filalogger)
EX6 Filament Maker Bundle — EX6 Standard + Airpath + Spooler + Filameasure (with Filalogger)
EX6 Industrial Filament Maker Bundle — EX6 Industrial + Airpath + Spooler + Filameasure (with Filalogger)
EX3 Full Recycling Bundle — Reclaimer + EX3 + Airpath + Spooler + Pelletizer
EX6 Standard Full Recycling Bundle — Reclaimer + EX6 Standard + Airpath + Spooler + Pelletizer
EX6 Industrial Full Recycling Bundle — Reclaimer + EX6 Industrial + Airpath + Spooler + Pelletizer
Compatible materials
PLA, PETG, PC, Nylon, PP, ABS*, HIPS*, PS* and other rigid plastics; minimum input thickness about 0.030 in (0.75 mm). *Ensure proper ventilation and filtration when extruding these materials—can emit harmful fumes.
What's included
Reclaimer main body
Motor base assembly
Shredder hopper and granulator hopper with gas-spring assemblies
Mounting hardware (5/16"-18 and 3/8"-16 bolts and washers)
(20) plastic drawstring colle
- SKU
- UM-FB00809 (3D Universe)
Vendor Pricing & Availability
3D Universe
Updated: 3 hours ago
$13,995.00
Free Shipping
Store links may be affiliate links: we may earn a commission at no extra cost to you.
Advertisement
Price history
Lowest price each day
$13,995
Collecting price history
We have one day of prices so far. The trend line appears after at least two days.
View as table
| Date | 3D Universe |
|---|---|
| Nov 17, 2026 | $13,995 |
Advertisement