Filabot Filameasure Inline Filament Measurement (Complete Package)
Description
Measure it as you make it
Consistent diameter is what makes home-made filament print reliably. The Filameasure reads diameter live as filament passes through the Spooler so you can tune puller speed and extruder settings immediately and lock in a print-ready diameter (Filabot's typical tolerance with standard materials is ±0.05 mm). A built-in tension applicator keeps contact consistent, and the full-size/tolerance-variation readout makes drift obvious at a glance. Add Filalogger and every spool gets a traceable record: live diameter graphs on screen and automatic CSV logs for quality control, research data and spool reports.
Key features
Inline diameter measurement — mounts to the Filabot Spooler (or Spooler Max) to measure filament live as it is produced.
0–5 mm measurement range — common sizes (1.75 mm, 2.85 mm) and specialty diameters for R&D or custom runs.
Mitutoyo digital indicator — a top-of-the-line gauge with full-size reading and tolerance-variation window.
Filalogger SPC + software — live graphing and CSV logging of diameter over time on Windows and macOS.
Built-in tension applicator — applies consistent contact to stabilize readings during extrusion.
Rugged, simple build — 13 oz unit that installs in minutes.
Part of the Filabot Modular Ecosystem
Every Filabot machine is a building block. The equipment is modular, so you can start with the workflow you need today and expand later—adding cooling, measurement, spooling, pelletizing or shredding—without replacing what you already own. All units are bench-top sized and run on standard 110 V single-phase power (no 3-phase required), so a complete line fits comfortably next to your 3D printers.
The Filameasure covers the Measure stage and is included in the three Filament Maker Bundles. How it combines with the rest of the line:
Requires the Spooler (or Spooler Max) — the gauge mounts to the Spooler frame and reads filament as it is pulled.
Use the readout to balance output from the EX3 Filament Extruder, EX6 Standard Filament Extruder or EX6 Industrial Filament Extruder against Spooler pull speed.
Pair with the Airpath Filament Cooler so filament is fully stabilized before it reaches the gauge.
Building a recycling loop with the Reclaimer and Pelletizer? Filalogger logs let you document how recycled blends hold diameter batch after batch.
Product
Stage
Role in the line
Reclaimer
Reclaim
Two-stage shredder + granulator turns failed prints and scrap into extrudable granulate.
EX3 Filament Extruder
Extrude
Accessible, compact extruder for education, makerspaces, recycling and early-stage material development.
EX6 Standard Filament Extruder
Extrude
Professional 24:1 extruder with four PID heat zones and 4+ kg/hr output for R&D and production.
EX6 Industrial Filament Extruder
Extrude
EX6 with nitrided barrel and screw for abrasive, filled and reinforced compounds.
Airpath Filament Cooler
Cool
Forced-convection cooling that stabilizes filament diameter before it reaches the Spooler.
Filameasure (this product)
Measure
Inline diameter gauge with Filalogger data logging; mounts to the Spooler.
Spooler
Spool
Pulls, traverses and winds finished filament onto 0.5 kg / 1 kg spools.
Pelletizer
Pelletize
Chops filament into uniform pellets for re-extrusion, compounding or injection molding.
Prefer a complete, pre-configured system?
Filabot bundles are priced below the sum of their parts:
EX3 Filament Maker Bundle — EX3 + Airpath + Spooler + Filameasure (with Filalogger)
EX6 Filament Maker Bundle — EX6 Standard + Airpath + Spooler + Filameasure (with Filalogger)
EX6 Industrial Filament Maker Bundle — EX6 Industrial + Airpath + Spooler + Filameasure (with Filalogger)
EX3 Full Recycling Bundle — Reclaimer + EX3 + Airpath + Spooler + Pelletizer
EX6 Standard Full Recycling Bundle — Reclaimer + EX6 Standard + Airpath + Spooler + Pelletizer
EX6 Industrial Full Recycling Bundle — Reclaimer + EX6 Industrial + Airpath + Spooler + Pelletizer
What's included
Mitutoyo Filameasure inline gauge with Spooler mount
Filalogger SPC unit and cables
Filalogger software (Windows & macOS download)
User manuals
Laptop/tablet not included.
Specifications
Measuring range
0–5 mm
Indicator
Mitutoyo digital indicator
Software
Filalogger (Windows & macOS), live graphing and CSV logging
Dimensions
5.07 in L × 2.42 in W × 6.69 in H
Weight
13 oz
Mounting
Filabot Spooler or Spooler Max
Warranty
1-year warranty
Country of origin
USA (Barre, Vermont)
Resources
Filabot Filameasure Datasheet (PDF)
Filabot Selection Guide 2026 (PDF) — choosing between the EX3, EX6 Standard and EX6 Industrial
About Filabot
Filabot is a Vermont-based engineering and R&D company that has built filament-making and small-scale polymer-processing systems since 2011. Thousands of systems are in use worldwide, and Filabot equipment has been referenced in more than 1,300 published research articles. Filabot provides direct technical support, installation and material-processing guid
- SKU
- UM-FB00819 (3D Universe)
Vendor Pricing & Availability
3D Universe
Updated: 3 hours ago
$1,190.00
Free Shipping
Store links may be affiliate links: we may earn a commission at no extra cost to you.
Advertisement
Price history
Lowest price each day
$1,190
Collecting price history
We have one day of prices so far. The trend line appears after at least two days.
View as table
| Date | 3D Universe |
|---|---|
| Nov 17, 2026 | $1,190 |
Advertisement