Filabot EX6 Industrial Filament Extruder
Description
Built for demanding materials and demanding environments
The EX6 Industrial is Filabot's answer for industrial R&D and production teams whose work routinely includes abrasive or highly filled compounds. Its nitrided barrel and screw resist the wear caused by glass, carbon, ceramic and mineral fillers, while the same 24:1 L/D screw architecture, four-zone PID temperature control and precise screw-speed control as the EX6 Standard give you control over mixing, residence time, output and consistency from first trials through ongoing production.
Key features
Nitrided barrel & screw — superior hardness and wear resistance for filled polymers, abrasives and reinforced compounds.
High-temperature processing — a 425 °C maximum operating temperature enables high-performance polymers such as PEEK and ULTEM.
Industrial throughput — more than 10 lb (4.5 kg) per hour of PLA supports higher-volume production.
Four-zone temperature control — four independently controlled heating zones create precise, material-specific thermal profiles.
Interchangeable screw profiles — removable screws allow faster cleaning and process optimization for different formulations.
Broad feedstock capability — from 3.18 mm pellets to powder.
Precise speed control & high-torque drive — reliable material conveyance under demanding processing conditions.
Production-to-R&D flexibility — supports formulation trials, screw testing, process development and repeatable production.
EX6 Standard or EX6 Industrial?
Choose the Industrial when all the benefits of the EX6 must be paired with increased wear resistance: abrasive composites, highly filled compounds, glass/carbon/mineral additives, or extended production runs in demanding environments. If your materials are not abrasive or highly filled, the EX6 Standard delivers the same process control and output. See the Filabot Selection Guide below for a side-by-side comparison.
Fast payback. A school, makerspace or print farm that recycles roughly 2,000 kg of material a year can pay back a complete Filabot system in under six months versus buying new filament—while teaching hands-on polymer science along the way.
Part of the Filabot Modular Ecosystem
Every Filabot machine is a building block. The equipment is modular, so you can start with the workflow you need today and expand later—adding cooling, measurement, spooling, pelletizing or shredding—without replacing what you already own. All units are bench-top sized and run on standard 110 V single-phase power (no 3-phase required), so a complete line fits comfortably next to your 3D printers.
The EX6 Industrial covers the Extrude stage. Complete the line:
Airpath Filament Cooler — forced-convection cooling that stabilizes diameter and allows higher line speeds; add a second Airpath for high-temperature polymers.
Spooler — pull, traverse and wind onto 0.5 kg / 1 kg spools.
Filameasure — live inline diameter measurement with Filalogger logging, mounted on the Spooler.
Pelletizer — chop filament into uniform pellets; handles carbon- and glass-filled polymers.
Reclaimer — shred failed prints and scrap into granulate the extruder can process.
Upgrading from an EX3 Filament Extruder or EX6 Standard? All of your downstream Filabot equipment carries over.
Product
Stage
Role in the line
Reclaimer
Reclaim
Two-stage shredder + granulator turns failed prints and scrap into extrudable granulate.
EX3 Filament Extruder
Extrude
Accessible, compact extruder for education, makerspaces, recycling and early-stage material development.
EX6 Standard Filament Extruder
Extrude
Professional 24:1 extruder with four PID heat zones and 4+ kg/hr output for R&D and production.
EX6 Industrial Filament Extruder (this product)
Extrude
EX6 with nitrided barrel and screw for abrasive, filled and reinforced compounds.
Airpath Filament Cooler
Cool
Forced-convection cooling that stabilizes filament diameter before it reaches the Spooler.
Filameasure
Measure
Inline diameter gauge with Filalogger data logging; mounts to the Spooler.
Spooler
Spool
Pulls, traverses and winds finished filament onto 0.5 kg / 1 kg spools.
Pelletizer
Pelletize
Chops filament into uniform pellets for re-extrusion, compounding or injection molding.
Prefer a complete, pre-configured system?
Filabot bundles are priced below the sum of their parts:
EX3 Filament Maker Bundle — EX3 + Airpath + Spooler + Filameasure (with Filalogger)
EX6 Filament Maker Bundle — EX6 Standard + Airpath + Spooler + Filameasure (with Filalogger)
EX6 Industrial Filament Maker Bundle — EX6 Industrial + Airpath + Spooler + Filameasure (with Filalogger)
EX3 Full Recycling Bundle — Reclaimer + EX3 + Airpath + Spooler + Pelletizer
EX6 Standard Full Recycling Bundle — Reclaimer + EX6 Standard + Airpath + Spooler + Pelletizer
EX6 Industrial Full Recycling Bundle — Reclaimer + EX6 Industrial + Airpath + Spooler + Pelletizer
Compatible materials
PLA, PC, PETG, PET/PETE, PP, PE (HDPE, LDPE, LLDPE), PEI (ULTEM), PEEK, Nylon (PA
- SKU
- UM-FB00911 (3D Universe)
Vendor Pricing & Availability
3D Universe
Updated: 4 hours ago
$19,995.00
Free Shipping
Store links may be affiliate links: we may earn a commission at no extra cost to you.
Advertisement
Price history
Lowest price each day
$19,995
Collecting price history
We have one day of prices so far. The trend line appears after at least two days.
View as table
| Date | 3D Universe |
|---|---|
| Nov 17, 2026 | $19,995 |
Advertisement