CLEARANCE B STOCK - Carbonara COLOR Carbon Fiber X Beam for Voron and Monolith Gantry 3D Printers - 250mm / Yellow
Description
THESE ARE CLEARANCE AND SOLD AS-IS. We guarantee structural integrity, however your rail may have slight defects in coloration, weave or have a visible seam. We are selling these at 50% off list.
Meet Carbonara, an ultra light carbon fiber X beam that actually works. Save grams with a 58.8% weight reduction and increase acceleration and speeds without increasing artifacts and rigidity. These are specifically designed for Voron and Monolith gantry printers, and replace your 2020 x extrusion.
This product was thoughtfully designed, taking over a year and a half of development to perfect. Multiple layers of woven carbon fiber with a cosmetic top layer. It's thicker than most tubes on the market and has rounded corners to increase strength.
The Carbonara beam features 130C resin, and it has been tested at high temperature. This is perhaps the best 3D printer x beam on the market, built incredibly tough, light and has minimal dimension variation on heatsoak.
For additional details see the Printables Repository.
Note - this listing is for the carbon fiber x beam, the linear rail shown in the product image is for display purposes only and not part of the shipped product.
Key features:
High torsion resistance
Made with high-temperature resin. 110°C short-term temperature resistance, good for 90°C chamber.
Ultra light, up to 58% weight reduction from a standard 2020 aluminium extrusion (before hardware and inserts).
Smooth 3K carbon strand finish
Pre-drilled, easy installation
Unmatched price/performance
Tested for 800 hours at VERY high speeds, 500-1300mm/s @ 50.000-100.000m/s² with 80ºc chamber.
Printer Build Size (mm)
X Gantry Length (mm)
Carbonara Weight (g)
2020 extrusion Weight (g)
Weight Reduction
250
330
64,7
157,1
58,8%
300
380
74,5
181,0
350
430
84,3
204,8
Warhammer 40k Laspistol prop in ABS 285ºc 500mm/s 20.000mm/s2
IMPORTANT!
The printed inserts are a MUST to ensure maximum performance.
Please make sure they are all aligned and facing the same direction.
The inserts must be a snug fit, not loose.
Hollow spacers aren't mandatory, they are only used to facilitate installation.
Inserts must be printed in CF/GF filament with HDT ≥ 110°C, such as, PET-CF, PCPBTGF.
The indented part of the printed inserts is meant to face the linear rail.
Google Sheet: BOM for the inserts and tube
The full, detailed CAD is available in the Monolith Discord.
This project has been made in collaboration with the Monolith team
Special thanks to:
Adeo: Ko-Fi, Github
For the amazing temperature and torsion testing
(can be found in the Monolith Discord)
CloakedWayne: Ko-Fi, Github
For the incredible mounting inserts
If you wish to support the Developer directly (outside the purchase of this product from us), Ko-Fi
- SKU
- CAR5167250YEL (West3D)
Vendor Pricing & Availability
West3D
Updated: 14 hours ago
$39.99
Free Shipping
Store links may be affiliate links: we may earn a commission at no extra cost to you.
Advertisement
Price history
Lowest price each day
$39.99
Collecting price history
We have one day of prices so far. The trend line appears after at least two days.
View as table
| Date | West3D |
|---|---|
| Nov 17, 2026 | $39.99 |
Advertisement