Bambu Lab PLA Aero (1.75mm, 1kg) - White (14102)
Description
Bambu PLA Aero
Bambu PLA Aero achieves low density and light weight by foaming at high temperatures during printing and creating small holes inside the prints. It's the perfect choice for light-weight and energy-saving prints, including unmanned aerial vehicles (UAVs), aerodynamic models, and gliders.
Foaming PLA materials (PLA Aero) have high requirements for material drying and parameter settings. Please carefully read Instructions for printing aircraft model with foaming PLA (PLA Aero) before starting the printing process.
Low Density and Light Weight
Bambu PLA Aero has almost the same filament density as regular PLA, while the prints density is only 50% to 80%.
* When printing models of the same volume, PLA Aero is about half the weight of PLA Basic.
Controllable Model Density
Achieve lower density of the prints by increasing printing temperature and lowering flow rate.
* The average density of prints will vary with changes in parameters such as actual printing temperature, flow rate ratio, printing speed, model size, wall thickness and infill density.
Parameter Setting Average Density Printing Temperature
Increases ↗
Decreases ↘
Printing Speed
Increases ↗
Stable or Increases ↗
Flow Rate Ratio
Increases ↗
Increases ↗
Model Size
Increases ↗
Decreases ↘
Wall Thickness(Wall loops
Increases ↗
Increases ↗
Infill Density
Increases ↗
Increases ↗
The relationship between the maximum foaming rate, minimum print density, and printing temperature of PLA Aero.
Printing Temperature Minimum Flow Rate Ratio Maximum Volumetric Expansion Ratio Maximum Foaming Rate Minimum Prints Densi 190 °C
~ 0.95
~ 100%
~ 0%
~ 1.17 g/cm³
200 °C
0.89
110%
10%
1.06 g/cm³
210 °C
0.85
115%
15%
1.02 g/cm³
220 °C
0.76
129%
29%
0.91 g/cm³
230 °C
0.62
158%
58%
0.74 g/cm³
240 °C
0.45
217%
117%
0.54 g/cm³
250 °C
0.38
258%
158%
0.45 g/cm³
260 °C
0.35
280%
180%
0.42 g/cm³
270 °C
0.37
265%
165%
0.44 g/cm³
Specimen Test: Nozzle Type: 0.4 mm; Printing Speed: 80 mm/s; Model size (L*W*H): 80*10*4 mm³ (the XY direction)
The actual required flow rate ratio and final model density may vary with different models.
Tough with Good Impact Resistance
Compared to pre-foaming Wood PLA, Bambu PLA Aero and its prints are tougher and more resistant to impact, collision, and falling.
Matte Finish For Easy Coloring
Bambu PLA Aero provides an easy-to-color matte surface texture with better dyeing results as compared to PLA Basic.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Parameters Comparison
PLA Basic PLA Aero Printing Temperature
190 - 230 ℃
220 - 260 ℃
Printing Speed
< 300 mm/s
< 180 mm/s
Flow Rate Ratio
0.96 - 1
0.5 - 0.8
Filament Density
1.24 g/cm³
1.21 g/cm³
Foaming Rate
/
0 - 120%
Prints Density
1.21 g/cm³
0.55 - 1.05 g/cm³
Accessory Compatibility
Recommended Not Recommended Build Plate
Cool Plate, High Temperature Plate or Textured PEI Plate
/
Hotend
0.4 mm Nozzle (All type)
0.6 mm / 0.8mm Nozzle
Glue
Bambu Liquid Glue / Glue Stick
/
Recommended Printing Settings
Drying Settings (Blast Drying Oven):
55 °C,8 h
Printing and Keeping Container's Humidity:
< 20% RH (Sealed, with Desiccant)
Nozzle Temperature:
220 - 260 °C
Bed Temperature (with Glue):
35 - 45 °C
Printing Speed:
< 180 mm/s
Physical Properties
Density:
1.21 g/cm³
Vicat Softening Temperature:
54 °C
Heat Deflection Temperature:
53 °C
Melting Temperature:
153 °C
Melt Index:
7.7 ± 0.6 g/10 min
Mechanical Properties
Tensile Strength:
24 ± 2 MPa
Breaking Elongation Rate:
2.6 ± 0.7 %
Bending Modulus:
1690 ± 120 MPa
Bending Strength:
45 ± 4 MPa
Impact Strength:
28.8 ± 1.3 kJ/m²
Downloads
Filament TDS
Filament MSDS
Filament RoHS
Printing Tips
• PLA Aero filament is relatively soft which may result in material loading and unloading failures during AMS printing.
• Drying conditions: 55℃ for 8 hrs. PLA Aero is highly sensitive to humidity. To achieve optimal printing performance, it is recommeded further drying before use and after storage. For more details please refer to: Filament drying instructions on WIKI.
What's in the Box?
Filament with Spool*1 & Desiccant*1
Filament Label*1
Package*1
- SKU
- A11-W0-1.75-1000-SPL (3D Universe)
Vendor Pricing & Availability
30-day range: $43.95 – $44.20Sold at 2 stores, cheapest first.
3DJake
Listed as “Bambu Lab PLA Aero White, Spool”
Updated: 5 hours ago
$43.95
Free Shipping
3D Universe
Updated: 5 hours ago
$44.99
Free Shipping
Store links may be affiliate links: we may earn a commission at no extra cost to you.
Advertisement
Price history
Lowest price each day, by store
- 3D Universe $44.99
- 3DJake $43.95 ▼0.6%
Middle 50%: – · items
View as table
| Date | 3D Universe | 3DJake |
|---|---|---|
| Nov 18, 2026 | $44.99 | $43.95 |
| Nov 17, 2026 | — | $44.04 |
| Nov 16, 2026 | — | $44.20 |
Bambu Lab PLA Aero (1.75mm, 1kg) - White (14102) price history: over the last 3 days of tracking the lowest price was $43.95 and the highest $44.20. The lowest price we've tracked is $43.95 (Nov 18, 2026), and we've followed it since Nov 16, 2026.
Compare prices
Advertisement