Bambu Lab ASA (1.75mm, 1kg) - Green (45500 - HEX #00A6A0)
Description
Bambu ASA
Bambu ASA is a highly durable material that offers exceptional UV, weather, mechanical, and thermal resistance. Its unique combination of properties makes it an ideal material for printing outdoor models (plant signs, mailboxes, wind vanes, etc.) and structural parts that require long-term exposure to challenging outdoor conditions.
Extraordinary Weather & UV Resistance
Bambu ASA offers extraordinary UV, oxidation, and aging resistance, providing effective protection against breakage and color degradation when used outdoors for long-term purposes.
Tough and Durable
Suitable for outdoor applications and regular structural requirements due to its toughness and high impact strength.
Better Temperature Resistance
Compared to normal PETG or ABS, Bambu ASA can remain in shape even at a temperature of 100°C.
Frequently Asked Questions
1. What is the difference between ABS and ASA?
ASA is a modified version of ABS that contains an additional acrylate component, which improves its weather adaptability and UV resistance.
ASA retains the impact resistance and processability of ABS while providing better resistance to fading, yellowing, and degradation from sunlight exposure. Both of them may release pungent and unpleasant odors during printing, but the pungent odor of ASA is notably lighter than ABS.
2. What is the difference applications between ABS and ASA?
ASA is ideal for outdoor applications, such as automotive exterior parts, signage, and outdoor equipment, thanks to its enhanced weather resistance and color stability. ABS is a versatile material with excellent mechanical properties that is commonly used for indoor applications.
3. What are the similarities between ABS and ASA?
In terms of physical and mechanical properties, both exhibit good impact resistance and high tensile strength, with almost the same levels of strength, toughness, and stiffness. Both ABS and ASA may release pungent and unpleasant odors during printing and the same warping tendency and enclosed printer requirement when printing large-size and/or high infill density models.
ASA Hex Code Table
Color Hex Code Display White
#FFFAF2
Gray
#8A949E
Red
#E02928
Green
#00A6A0
Blue
#2140B4
Black
#000000
Gray
#353533
Black
#000000
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Parameters Comparison
ABS ASA PC Composition
acrylonitrile - butadiene - styrene
acrylonitrile - styrene - acrylate
Polycarbonate
AMS Compatibility
YES
YES
YES
Dry Out Before Use
Recommended
Recommended
Required
Toughness (Impact Strength - XY)
39.3 kJ/m²
41.0 kJ/m²
34.8 kJ/m²
Strength (Bending Strength - XY)
62 MPa
65 MPa
108 MPa
Stiffness (Bending Modulus - XY)
1880 MPa
1920 MPa
2310 MPa
Layer Adhesion (Impact Strength - Z)
7.4 kJ/m²
4.9 kJ/m²
9.0 kJ/m²
Heat Resistant(HDT, 0.45 MPa)
87 ℃
100 ℃
117 ℃
Odor During Printing
Pungent odor
Relatively lighter pungent odor
Light phenol-flavored odor
Accessory Compatibility
Recommended Not Recommended Build Plate
Engineering Plate, High Temperature Plate or Textured PEI Plate
Cool Plate
Hotend
All Size / Material
/
Glue
Bambu Liquid Glue / Glue Stick
/
Recommended Printing Settings
Drying Settings (Blast Drying Oven):
80 °C,8 h
Printing and Keeping Container's Humidity:
< 20% RH (Sealed, with Desiccant)
Nozzle Temperature:
240 - 270 °C
Bed Temperature (with Glue):
80 - 100 °C
Printing Speed:
< 250 mm/s
Physical Properties
Density:
1.05 g/cm³
Vicat Softening Temperature:
106 °C
Heat Deflection Temperature:
100 °C
Melting Temperature:
210 °C
Melt Index:
7.0 ± 0.8 g/10 min
Mechanical Properties
Tensile Strength:
37 ± 3 MPa
Breaking Elongation Rate:
9.2 ± 1.4 %
Bending Modulus:
1920 ± 130 MPa
Bending Strength:
65 ± 5 MPa
Impact Strength:
41.0 ± 2.3 kJ/m²
Downloads
Filament TDS
Filament MSDS
Filament RoHS
Printing Tips
• Pungent and unpleasant odors may be released during printing. Make sure your printer is placed in a well-ventilated area.
• Drying conditions: 80 ℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
• ASA is prone to warping when printing large size and/or high infill density model. To avoid warping: 1) Not recommemded to print too large size and/or high infill density models. 2) Use enclosure printers and ensure the build plate is properly glued before printing. 3) Set lower printing speed and higher heatbed temperature. For more details please refer to: Common print quality problems and solutions on WIKI.
What's in the Box?
Filament with Spool*1 & Desiccant*1
Filament Label*1
Package*1
- SKU
- B01-G0-1.75-1000-SPL (3D Universe)
Vendor Pricing & Availability
3D Universe
Updated: 5 hours ago
$29.99
Free Shipping
Store links may be affiliate links: we may earn a commission at no extra cost to you.
Advertisement
Price history
Lowest price each day
$29.99
Collecting price history
We have one day of prices so far. The trend line appears after at least two days.
View as table
| Date | 3D Universe |
|---|---|
| Nov 18, 2026 | $29.99 |
Bambu Lab ASA (1.75mm, 1kg) - Green (45500 - HEX #00A6A0) price history: the price has held at $29.99 since Nov 18, 2026. The lowest price we've tracked is $29.99 (Nov 18, 2026), and we've followed it since Nov 18, 2026.
Advertisement