Bambu Lab ASA (1.75mm, 1kg) - Blue (45600 - HEX #2140B4)

Description

Bambu ASA

Bambu ASA is a highly durable material that offers exceptional UV, weather, mechanical, and thermal resistance. Its unique combination of properties makes it an ideal material for printing outdoor models (plant signs, mailboxes, wind vanes, etc.) and structural parts that require long-term exposure to challenging outdoor conditions.

Extraordinary Weather & UV Resistance

Bambu ASA offers extraordinary UV, oxidation, and aging resistance, providing effective protection against breakage and color degradation when used outdoors for long-term purposes.

Tough and Durable

Suitable for outdoor applications and regular structural requirements due to its toughness and high impact strength.

Better Temperature Resistance

Compared to normal PETG or ABS, Bambu ASA can remain in shape even at a temperature of 100°C.

Frequently Asked Questions

1. What is the difference between ABS and ASA?
ASA is a modified version of ABS that contains an additional acrylate component, which improves its weather adaptability and UV resistance.
ASA retains the impact resistance and processability of ABS while providing better resistance to fading, yellowing, and degradation from sunlight exposure. Both of them may release pungent and unpleasant odors during printing, but the pungent odor of ASA is notably lighter than ABS.
2. What is the difference applications between ABS and ASA?
ASA is ideal for outdoor applications, such as automotive exterior parts, signage, and outdoor equipment, thanks to its enhanced weather resistance and color stability. ABS is a versatile material with excellent mechanical properties that is commonly used for indoor applications.
3. What are the similarities between ABS and ASA?
In terms of physical and mechanical properties, both exhibit good impact resistance and high tensile strength, with almost the same levels of strength, toughness, and stiffness. Both ABS and ASA may release pungent and unpleasant odors during printing and the same warping tendency and enclosed printer requirement when printing large-size and/or high infill density models.

ASA Hex Code Table

Color Hex Code Display White

#FFFAF2

Gray

#8A949E

Red

#E02928

Green

#00A6A0

Blue

#2140B4

Black

#000000

Gray

#353533

Black

#000000

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.

Parameters Comparison

ABS ASA PC Composition

acrylonitrile - butadiene - styrene

acrylonitrile - styrene - acrylate

Polycarbonate

AMS Compatibility

YES

YES

YES

Dry Out Before Use

Recommended

Recommended

Required

Toughness (Impact Strength - XY)

39.3 kJ/m²

41.0 kJ/m²

34.8 kJ/m²

Strength (Bending Strength - XY)

62 MPa

65 MPa

108 MPa

Stiffness (Bending Modulus - XY)

1880 MPa

1920 MPa

2310 MPa

Layer Adhesion (Impact Strength - Z)

7.4 kJ/m²

4.9 kJ/m²

9.0 kJ/m²

Heat Resistant(HDT, 0.45 MPa)

87 ℃

100 ℃

117 ℃

Odor During Printing

Pungent odor

Relatively lighter pungent odor

Light phenol-flavored odor

Accessory Compatibility

Recommended Not Recommended Build Plate

Engineering Plate, High Temperature Plate or Textured PEI Plate

Cool Plate

Hotend

All Size / Material

/

Glue

Bambu Liquid Glue / Glue Stick

/

Recommended Printing Settings

Drying Settings (Blast Drying Oven):
80 °C,8 h
Printing and Keeping Container's Humidity:
< 20% RH (Sealed, with Desiccant)
Nozzle Temperature:
240 - 270 °C
Bed Temperature (with Glue):
80 - 100 °C
Printing Speed:
< 250 mm/s

Physical Properties

Density:
1.05 g/cm³
Vicat Softening Temperature:
106 °C
Heat Deflection Temperature:
100 °C
Melting Temperature:
210 °C
Melt Index:
7.0 ± 0.8 g/10 min

Mechanical Properties

Tensile Strength:
37 ± 3 MPa
Breaking Elongation Rate:
9.2 ± 1.4 %
Bending Modulus:
1920 ± 130 MPa
Bending Strength:
65 ± 5 MPa
Impact Strength:
41.0 ± 2.3 kJ/m²

Downloads

Filament TDS

Filament MSDS

Filament RoHS

Printing Tips

• Pungent and unpleasant odors may be released during printing. Make sure your printer is placed in a well-ventilated area.
• Drying conditions: 80 ℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
• ASA is prone to warping when printing large size and/or high infill density model. To avoid warping: 1) Not recommemded to print too large size and/or high infill density models. 2) Use enclosure printers and ensure the build plate is properly glued before printing. 3) Set lower printing speed and higher heatbed temperature. For more details please refer to: Common print quality problems and solutions on WIKI.

What's in the Box?

Filament with Spool*1 & Desiccant*1

Filament Label*1

Package*1

SKU
B01-B0-1.75-1000-SPL (3D Universe)

Vendor Pricing & Availability

3D Universe

Updated: 5 hours ago

$29.99

Free Shipping

Buy Now →

Store links may be affiliate links: we may earn a commission at no extra cost to you.

Sort:
Sort:
Sort:
Sort:

Advertisement

Price history

Lowest price each day

$29.99

Collecting price history

We have one day of prices so far. The trend line appears after at least two days.

View as table
Date 3D Universe
Nov 18, 2026 $29.99

Bambu Lab ASA (1.75mm, 1kg) - Blue (45600 - HEX #2140B4) price history: the price has held at $29.99 since Nov 18, 2026. The lowest price we've tracked is $29.99 (Nov 18, 2026), and we've followed it since Nov 18, 2026.

Advertisement

Zeb · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.

Eck · 2d ago

Message hidden until you log in.

7 recent messages, hidden until you log in. Log in or sign up to read the chat and join in.

Send private messages to other members.

Log in