Bambu Lab AMS - Automatic Material System (AMS 1)

Description

Product Features

Multi-Colors/materials Capability

Keep Filament Dry

Filament Runout & Winding Detection

AMS Filament Backup

The AMS is compatible with P2 series printers with extra accessories needed. Please make sure to select corresponding accessories in the add-on section according to your use case.

Important notice

The AMS requires specific accessory configurations for various Bambu Lab 3D printers.All accessories mentioned in the description need to purchase separately

See the Multiple AMS Units Connection Guide for detailed setup instructions.

*Please note the product is the same among all variants, and the only difference is recommended accessories. You may place an order from any variant in stock.

Make Multi-Color 3D Printing Real

Color, the ultimate expression of emotions, is brought to you by Bambu Lab's Automatic Material System (AMS). You can now enjoy printing freely in multiple colors and materials.

Multi-Material Printing

Applicable to most materials such as PLA, ABS, ASA, PETG, PC, etc.

Hassle-Free Support Removal

With AMS, Bambu Lab printers can use snap-away support material or dissolvable filament to minimize the pain of removing supports.

No More Filament Leftover

Without AMS, when the filament runs out, manual spool replacement interrupts printing and results in wasted filaments.

With AMS, there is a seamless transition to a new spool which keeps uninterrupted printing and minimizes waste.

Filament Backup

Your print never stops with automatic spool changing. With AMS filament backup function, never worry about running out of filament during your sleep or absence, ensuring a seamless and uninterrupted printing process, preventing any filament waste and promoting energy efficiency.

Advanced Intelligent System

Powered by a 32-bit MCU, sensor arrays, actuators, and a smart algorithm, the AMS has reached unprecedented levels of intelligence. It expertly manages filament loading and unloading, along with efficient fault detection and recovery.

For more detailed information please refer to AMS feeding system.

Filament Tangle Detection

When the filament at the toolhead encounters resistance, it may be that the filament is tangled or the spool is stuck, AMS can detect it immediately and suspend printing to avoid air printing.

For more detailed information please refer to filament entangled.

Say Goodbye to Wet Filaments

Filament that has absorbed moisture can lead to print quality issues and poor layer adhesion, or even nozzle clogging that can lead to a failed print.

Keep the Filament Dry

The AMS has an air-tight seal and with the help of dessicant material, it absorbs moisture to keep the moisture away from Filament.

A Humidity Sensor also detects the humidity inside the AMS and provides information to the user when the humidity is higher or the desicant may need to be replaced.

For best print quality, dry filament is required.

Automatic Filament Identification

Bambu Lab filaments use RFID which is read by the AMS to automatically identify and apply the best settings for your material.

The RFID tag is synchronized automatically to Bambu Studio.

Non Bambu Lab Filaments need to be manually configured in Bambu Studio or in the printer.

Support Up to 16 Colors

Each Bambu Lab AMS is composed of 4 filament slots, and up to 4 AMS can be installed in parallel and supports up to 16 colors for stunning prints that truly stand out. To achieve 16-color printing, connect 4 AMS via AMS hub

What's in the box

AMS

PTFE Tube

Bus Cable - 6pin & Bus Cable - 4pin

Spare Filament Cutter (x2)

PTFE Tube Connector

Filament Buffer

Reusable Spool (x3)

High Temperature Reusable Spool

AMS Tech Specs

Item
AMS Specification

Product Size
368*283*224 mm

Package Size
445*350*320 mm

Product Weight
2.5 kg

Gross Weight
4.68 kg

Material
ABS

Supported Filament
PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dry), BVOH (dry), PP, POM, HIPS and Bambu PLA-CF/ PAHT-CF/ PETG-CF

Unsupported Filament*
TPE, TPU, PVA (wet), BVOH (wet), Bambu PET-CF/ TPU 95A and other brand's filaments that contain carbon fiber or glass fiber

Filament Diameter
1.75 mm

Supported Spool Size*
width: 50-68 mm, diameter: 197-202 mm

SKU
SA001 (West3D)

Vendor Pricing & Availability

West3D

Updated: 2 hours ago

$249.99

Free Shipping

Buy Now →

Store links may be affiliate links: we may earn a commission at no extra cost to you.

Sort:

Advertisement

Price history

Lowest price each day

$250

Collecting price history

We have one day of prices so far. The trend line appears after at least two days.

View as table
Date West3D
Nov 17, 2026 $250

Advertisement

Zeb · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.

Eck · 23h ago

Message hidden until you log in.

7 recent messages, hidden until you log in. Log in or sign up to read the chat and join in.

Send private messages to other members.

Log in