Bambu Lab ABS-GF (1.75mm, 1kg) - Red (41200 - HEX #E83100)

Description

Bambu ABS-GF

Bambu ABS-GF is a glass fiber-reinforced ABS filament, enhanced in both mechanical and aesthetic properties. Compared with regular ABS, ABS-GF outperforms in strength, stiffness, temperature resistance and dimensional stability, while being less prone to deformation and warping. Glass fiber imparts a smooth matte finish with micro-spot gloss, blurring layer lines. ABS-GF is ideal for both mechanical parts and decorations due to the inherited water resistance, wear resistance, durability and vibrant colors.

Enhanced Strength and Stiffness

ABS-GF outclasses regular ABS in strength and stiffness, making it perfect for load-bearing and bending-resistance parts.

Greater Dimensional Stability

Glass fiber reinforcement gives ABS-GF better dimensional stability than regular ABS, minimizing warping and deformation during printing. This makes it ideal for intricate mechanical assembly parts or geometric components.

Specimen Test: Model size (L*W*H): 240*50*20 mm³ (the XY direction); Infill Density: 25%

Fine Matte Finish

The seamless matte finish, coupled with nearly invisible layer lines, gives ABS-GF a smooth appearance, making it ideal for decorative and fine-grained parts.

Water Resistance & Built to Last

PLA Matte Hex Code Table

Color Hex Code Display IWhite

#FFFFF

Gray

#C6C6C6

Yellow

#FFE133

Orange

#F48438

Red

#E83100

Green

#61BF36

Blue

#0C3B95

Black

#000000

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.

Parameters Comparison

ABS ABS-GF PA6-GF Composition

Acrylonitrile - butadiene - styrene

Acrylonitrile - butadiene - styrene, glass fiber

PA6, glass fiber

AMS Compatibility

YES

YES

YES

Dry Out Before Use

Recommended

Recommended

Required

Printing Speed

< 300 mm/s

< 180 mm/s

< 130 mm/s

Printer Type

Enclosure

Enclosure

Enclosure

Toughness (Impact Strength - XY)

39.3 kJ/m²

14.5 kJ/m²

27.2 kJ/m²

Strength (Bending Strength - XY)

62 MPa

68 MPa

120 MPa

Layer Strength (Bending Strength - Z)

39 MPa

46 MPa

51 MPa

Stiffness (Bending Modulus - XY)

1880 MPa

2860 MPa

3670 MPa

Layer Adhesion (Impact Strength - Z)

7.4 kJ/m²

5.3 kJ/m²

4.1 kJ/m²

Heat Resistance(HDT, 0.45 MPa)

87 °C

99 °C

182 °C

Saturated Water Absorption Rate/%(25 °C, 55% RH)

0.65

0.53

2.56

Accessory Compatibility

Recommended Not Recommended Build Plate

Engineering Plate, High Temperature Plate or Textured PEI Plate

Cool Plate

Hotend

Hardened Steel 0.4mm / 0.6mm (recommended) / 0.8 mm

Hotend with Stainless Steel Nozzle (all size)
Hotend with Hardened Steel Nozzle (0.2 mm))

Glue

Bambu Liquid Glue / Glue Stick

/

Recommended Printing Settings

Drying Settings (Blast Drying Oven):
80 °C, 8 h
Printing and Keeping Container's Humidity:
< 20% RH (Sealed, with Desiccant)
Nozzle Temperature:
240 - 270 °C
Bed Temperature (with Glue):
80 - 100 °C
Printing Speed:
< 180 mm/s

Physical Properties

Density:
1.08 g/cm³
Vicat Softening Temperature:
103 °C
Heat Deflection Temperature:
99 °C
Melting Temperature:
202 °C
Melt Index:
7.56 ± 1.4 g/10 min

Mechanical Properties

Tensile Strength:
36 ± 3 MPa
Breaking Elongation Rate:
6.3% ± 1.2%
Bending Modulus:
2860 ± 130 MPa
Bending Strength:
68 ± 4 MPa
Impact Strength:
14.5 ± 1.5 kJ/m²

Downloads

Filament TDS

Filament MSDS

Filament RoHS

Printing Tips

• Drying conditions: 80℃ for 8 hrs. Dry the filament before printing to achieve higher print quality.
• To minimize warping, avoid printing large-sized high infill density models. Use enclosed printers and ensure the build plate is properly applied with glue for better print adhesion before printing. Set lower printing speed and higher heatbed temperature. For more details please refer to: Common print quality problems and solutions on WIKI.
• Similar to ABS, pungent and unpleasant odors may be released during printing. Make sure your printer is placed in a well-ventilated area and use enclosed printers.

What's in the Box?

Filament with Spool*1 & Desiccant*1

Filament Label*1

Package*1

SKU
B50-R0-1.75-1000-spl (3D Universe)

Vendor Pricing & Availability

3D Universe

Updated: 5 hours ago

$29.99

Free Shipping

Buy Now →

Store links may be affiliate links: we may earn a commission at no extra cost to you.

Sort:
Sort:
Sort:
Sort:

Advertisement

Price history

Lowest price each day

$29.99

Collecting price history

We have one day of prices so far. The trend line appears after at least two days.

View as table
Date 3D Universe
Nov 18, 2026 $29.99

Bambu Lab ABS-GF (1.75mm, 1kg) - Red (41200 - HEX #E83100) price history: the price has held at $29.99 since Nov 18, 2026. The lowest price we've tracked is $29.99 (Nov 18, 2026), and we've followed it since Nov 18, 2026.

Advertisement

Zeb · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.
B

bob · 2d ago

Message hidden until you log in.

Eck · 2d ago

Message hidden until you log in.

7 recent messages, hidden until you log in. Log in or sign up to read the chat and join in.

Send private messages to other members.

Log in