Bambu Lab ABS-GF (1.75mm, 1kg) - Gray (41102 - HEX #C6C6C6)
Description
Bambu ABS-GF
Bambu ABS-GF is a glass fiber-reinforced ABS filament, enhanced in both mechanical and aesthetic properties. Compared with regular ABS, ABS-GF outperforms in strength, stiffness, temperature resistance and dimensional stability, while being less prone to deformation and warping. Glass fiber imparts a smooth matte finish with micro-spot gloss, blurring layer lines. ABS-GF is ideal for both mechanical parts and decorations due to the inherited water resistance, wear resistance, durability and vibrant colors.
Enhanced Strength and Stiffness
ABS-GF outclasses regular ABS in strength and stiffness, making it perfect for load-bearing and bending-resistance parts.
Greater Dimensional Stability
Glass fiber reinforcement gives ABS-GF better dimensional stability than regular ABS, minimizing warping and deformation during printing. This makes it ideal for intricate mechanical assembly parts or geometric components.
Specimen Test: Model size (L*W*H): 240*50*20 mm³ (the XY direction); Infill Density: 25%
Fine Matte Finish
The seamless matte finish, coupled with nearly invisible layer lines, gives ABS-GF a smooth appearance, making it ideal for decorative and fine-grained parts.
Water Resistance & Built to Last
PLA Matte Hex Code Table
Color Hex Code Display IWhite
#FFFFF
Gray
#C6C6C6
Yellow
#FFE133
Orange
#F48438
Red
#E83100
Green
#61BF36
Blue
#0C3B95
Black
#000000
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.
Parameters Comparison
ABS ABS-GF PA6-GF Composition
Acrylonitrile - butadiene - styrene
Acrylonitrile - butadiene - styrene, glass fiber
PA6, glass fiber
AMS Compatibility
YES
YES
YES
Dry Out Before Use
Recommended
Recommended
Required
Printing Speed
< 300 mm/s
< 180 mm/s
< 130 mm/s
Printer Type
Enclosure
Enclosure
Enclosure
Toughness (Impact Strength - XY)
39.3 kJ/m²
14.5 kJ/m²
27.2 kJ/m²
Strength (Bending Strength - XY)
62 MPa
68 MPa
120 MPa
Layer Strength (Bending Strength - Z)
39 MPa
46 MPa
51 MPa
Stiffness (Bending Modulus - XY)
1880 MPa
2860 MPa
3670 MPa
Layer Adhesion (Impact Strength - Z)
7.4 kJ/m²
5.3 kJ/m²
4.1 kJ/m²
Heat Resistance(HDT, 0.45 MPa)
87 °C
99 °C
182 °C
Saturated Water Absorption Rate/%(25 °C, 55% RH)
0.65
0.53
2.56
Accessory Compatibility
Recommended Not Recommended Build Plate
Engineering Plate, High Temperature Plate or Textured PEI Plate
Cool Plate
Hotend
Hardened Steel 0.4mm / 0.6mm (recommended) / 0.8 mm
Hotend with Stainless Steel Nozzle (all size)
Hotend with Hardened Steel Nozzle (0.2 mm))
Glue
Bambu Liquid Glue / Glue Stick
/
Recommended Printing Settings
Drying Settings (Blast Drying Oven):
80 °C, 8 h
Printing and Keeping Container's Humidity:
< 20% RH (Sealed, with Desiccant)
Nozzle Temperature:
240 - 270 °C
Bed Temperature (with Glue):
80 - 100 °C
Printing Speed:
< 180 mm/s
Physical Properties
Density:
1.08 g/cm³
Vicat Softening Temperature:
103 °C
Heat Deflection Temperature:
99 °C
Melting Temperature:
202 °C
Melt Index:
7.56 ± 1.4 g/10 min
Mechanical Properties
Tensile Strength:
36 ± 3 MPa
Breaking Elongation Rate:
6.3% ± 1.2%
Bending Modulus:
2860 ± 130 MPa
Bending Strength:
68 ± 4 MPa
Impact Strength:
14.5 ± 1.5 kJ/m²
Downloads
Filament TDS
Filament MSDS
Filament RoHS
Printing Tips
• Drying conditions: 80℃ for 8 hrs. Dry the filament before printing to achieve higher print quality.
• To minimize warping, avoid printing large-sized high infill density models. Use enclosed printers and ensure the build plate is properly applied with glue for better print adhesion before printing. Set lower printing speed and higher heatbed temperature. For more details please refer to: Common print quality problems and solutions on WIKI.
• Similar to ABS, pungent and unpleasant odors may be released during printing. Make sure your printer is placed in a well-ventilated area and use enclosed printers.
What's in the Box?
Filament with Spool*1 & Desiccant*1
Filament Label*1
Package*1
- SKU
- B50-D0-1.75-1000-spl (3D Universe)
Vendor Pricing & Availability
3D Universe Out of stock
Updated: 5 hours ago
$29.99
Free Shipping
Store links may be affiliate links: we may earn a commission at no extra cost to you.
Advertisement
Price history
Lowest price each day
$29.99
Collecting price history
We have one day of prices so far. The trend line appears after at least two days.
View as table
| Date | 3D Universe |
|---|---|
| Nov 18, 2026 | $29.99 |
Bambu Lab ABS-GF (1.75mm, 1kg) - Gray (41102 - HEX #C6C6C6) price history: the price has held at $29.99 since Nov 18, 2026. The lowest price we've tracked is $29.99 (Nov 18, 2026), and we've followed it since Nov 18, 2026.
Compare prices
Advertisement