AMBROSIA PLA Filament of the Gods - 1KG Bambu AMS Friendly Cardboard Spools Premium 3D Printing Filament - Blue / Refill Core

Description

Our refill cores have the same geometry as the Bambu refills.

Ambrosia Filament's line of PLA is part of our Low Calorie line of filament, no additives just butter smooth printing.

Feed your Printer the Filament of the Gods.

Derived from 100% Virgin Grade-A Non-Toxic pellets. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool.

PLA is most hobbyist makers material of choice for 3D printing. A bio-degradable plastic derived from renewable resources (such as corn... I know we say our filament is low calorie, but don't eat it - your printer is the only machine that should injest our filament!) it is one of the easiest materials to print with, with a relatively low melting point and is able to be printed without a heated bed. Printing with PLA is typically odorless, or when it smells gives of a 'sweet' aroma, and emits less harmful fumes than some other 3D printing materials, making it a safer option for enclosed spaces without proper ventilation.

Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.

Derived from 100% Virgin (Grade-A) non-toxic pellets

Diameter: 1.75mm (+/-0.03mm)

Filament Net Weight: 1KG

Spool Weight: 130G

The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (here).

Check out our other lines of Ambrosia Filament!

ASA

ASA-CF

ASA Sparkle

ASA Dolos

ABS+

PETG

PLA

PLA Dolos

PC-ABS

PC-CF

TPU

ABS Matte

ASA-GF

PLA-SILK

PHA

PPS-CF

PET-GF
Foaming TPU
PCTG

Ambrosia Filament's Recommended Print Settings for our PLA filament:

Attribute
Accepted Value(s) [Our Recommended Value]

Extruder Temperature

190-220 Degrees Celsius [210]

Heated Bed
0-65C Degrees Celsius [60]

Build Surface
PEI, Glass, Painters Tape, Buildtak, or similar surface [Smooth PEI]

Cooling Fan
50-100% range varies by cooling capabilities

Environmental Temperatures
15-40C [25C]

Soluble Support Materials
PVA, BVOH

Technical Specifications for our PLA Filament:

Physical Properties

Test Methodology
Values

Density
ISO1183
1.25-1.26 g/cm^3

Melt Flow Rate (250C/2.16KG)
ISO 1133
4-8 g/10min

Mechanical Properties
Test Methodology
Values

Tensile Strength
ISO 527
45-49 Mpa

Elongation at break
ISO 527
13-15.5%

Flexural Modulus
ISO 527
1000-1100 Mpa

Flexural Strength
ISO 178
69-75 Mpa

Impact Strength
ISO 180
4.5-5 KJ/m^2

Thermal Dynamic Properties
Test Methodology
Values

HDT@ 0.455 MPa(66 psi)
ISO 75
53C

Continuous Use Temperature
IEC 60216
50C

Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant.

Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.

SKU
AMB4410BLUREF (West3D)

Vendor Pricing & Availability

West3D

Updated: 13 hours ago

$18.99

Free Shipping

Buy Now →

Store links may be affiliate links: we may earn a commission at no extra cost to you.

Sort:
Sort:
Sort:
Sort:
Sort:

Advertisement

Price history

Lowest price each day

$18.99

Collecting price history

We have one day of prices so far. The trend line appears after at least two days.

View as table
Date West3D
Nov 17, 2026 $18.99

Advertisement

Zeb · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.
B

bob · 1d ago

Message hidden until you log in.

Eck · 1d ago

Message hidden until you log in.

7 recent messages, hidden until you log in. Log in or sign up to read the chat and join in.

Send private messages to other members.

Log in