AMBROSIA ASA-GF Glass Filled ASA Filament of the Gods - 1KG and 2KG Premium 3D Printing Filament - Voron Red / 1KG
Description
This filament is highly abrasive, we strongly recommend printing with Tungsten Carbide Nozzle like the Undertaker
Ambrosia Filament's line of ASA-GF filament is derived from 100% Virgin Grade-A Non-Toxic pellets and long chopped Glass Fiber. Manufactured to a tighter than standard tolerance (+/- 0.03mm) you'll experience consistent extrusion throughout the spool. Free of additives, this filament prints like butter.
Feed your Printer the Filament of the Gods.
ASA is the natural successor to ABS and is great for both mechanical, functional or decorative parts. It prints well, with less warping than some other filaments, however it is highly encouraged to use an enclosure. A heated bed is required.ASA filament has high strength, impact and weather resistance (including UV), and can withstand higher temperatures than many common filaments (e.g. PLA/PETG).
Adding chopped Glass Fiber to ASA increases its stiffness, toughness, strength and heat resistance and is an excellent choice for professional parts.
Arrives to you in a cardboard box, with filament wound in a cardboard spool, vacuum sealed with a desiccant bag.
Derived from 100% Virgin (Grade-A) non-toxic pellets
Glass Fiber Strands
Diameter: 1.75mm (+/-0.03mm)
Filament Net Weight: 1KG
Spool Weight: 130g
The glue holding the filament spool together is rated for an environment of 70C (158F). If using a filament dryer or require the filament spool by placed in an environment exceeding this temperature, we recommend printing a spool clip (Here).
Check out our other lines of Ambrosia Filament!
ASA
ASA-CF
ASA Sparkle
ASA Dolos
ABS+
PETG
PLA
PLA Dolos
PC-ABS
PC-CF
TPU
ABS Matte
ASA-GF
PLA-SILK
PHA
PPS-CF
PET-GF
Foaming TPU
PCTG
Ambrosia Filament's Recommended Print Settings for our ASA filament:
Attribute
Accepted Value(s) [Our Recommended Value]
Extruder Temperature
250-280 Degrees Celsius [270]
Heated Bed
100-120 Degrees Celsius [110]
Build Surface
PEI, Buildtak, or similar surface [Textured PEI]
Cooling Fan
0-70% range varies by cooling capabilities
Environmental Temperatures
40-120C [45C]
Soluble Support Materials
HIPS
Technical Specifications for our ASA-GF Filament:
Physical Properties
Test Methodology
Values
Density
ISO1183
1.12-1.13 g/cm3
Melt Flow Rate (250C/2.16KG)
ISO 1133
4045g/10min
Mechanical Properties
Test Methodology
Values
Tensile Strength
ISO 527
36 MPa
Elongation at break
ISO 527
1-2%
Flexural Modulus
ISO 527
4000 MPa
Flexural Strength
ISO 178
65 MPa
Impact Strength
ISO 180
6.7KJ/m2
Thermal Dynamic Properties
Test Methodology
Values
HDT@ 0.455 MPa(66 psi)
ISO 75
88C+ (TBD)
Filament can absorb moisture easily. To prevent moisture absorption and contamination, the packing of filament should be kept sealed and in an airtight container with desiccant.
Disclaimer: Filaments, including this product, may emit toxic fumes (Volatile Organic Compounds) into the air when heated. Please consider this and follow safety protocols when printing with Ambrosia Filament. Glass Fiber filaments have increased risk of use and should not be sanded or used without proper equipment. Handle with care, using appropriate tools and protective wear (e.g. gloves) when handling. Only use in a well ventilated area, with proper respiration equipment. Technical Data and Safety Data contained attempts to summarize to the best of our knowledge the properties, health and safety information of the specified product and how to handle it. However, it is your responsibility to determine the suitability for use. Ambrosia Filament provides no warranty and assumes no responsibility or liability for the information contained and expressly disclaims that the information is a representation or guarantee of the specifications, properties, or health and safety data.
- SKU
- AMB2050 (West3D)
Vendor Pricing & Availability
West3D
Updated: 14 hours ago
$26.99
Free Shipping
Store links may be affiliate links: we may earn a commission at no extra cost to you.
Advertisement
Price history
Lowest price each day
$26.99
Collecting price history
We have one day of prices so far. The trend line appears after at least two days.
View as table
| Date | West3D |
|---|---|
| Nov 17, 2026 | $26.99 |
Advertisement