The best filament guide
the only filament you need
Overview
Prusament PLA High Speed in Gravity Grey is an easy-to-print, reliable filament designed to handle modern high-speed kinematics without sacrificing surface finish or dimensional accuracy. It is an ideal baseline material for rapid prototyping, functional brackets, and everyday prints where consistent diameter tolerances (±0.02mm) matter.
Handling & Storage Notes
- Moisture Sensitivity: While PLA is relatively forgiving compared to PETG or Nylon, keeping the spool in a dry box or sealed bag with desiccant prevents stringing and brittle snap-breaks over time.
- Bed Prep: Clean your textured or smooth PEI sheet with 90%+ isopropyl alcohol before printing to ensure strong first-layer adhesion.
- Sample Spool Tip: Since this is a 25g sample coil rather than a full spool, feed it from a loose spool holder or keep an eye on the coil to prevent tangles during fast retractions.
Recommended Slicer Settings
- Nozzle Temperature: 215°C – 230°C (bump toward 225°C+ when pushing volumetric flow rates)
- Bed Temperature: 60°C
- Print Speed: Up to 200–300 mm/s depending on your hotend's max volumetric flow
- Cooling: 100% fan speed after the first 2 layers for crisp overhangs and bridging
Pro Tip: If you notice matte banding on outer walls at high speeds, increase your nozzle temperature by 5°C or cap your outer wall speed to 120 mm/s for a uniform satin sheen.
Build Parts & Store Pricing
All components in this build with latest merchant pricing.
Compatibility: no issues found.
- No printer selected yet. Add one to check your filament choices against it.